diff --git a/sf_tool_management/controllers/controllers.py b/sf_tool_management/controllers/controllers.py
index a524f0bc..51bd5882 100644
--- a/sf_tool_management/controllers/controllers.py
+++ b/sf_tool_management/controllers/controllers.py
@@ -36,3 +36,34 @@ class Manufacturing_Connect(http.Controller):
             res = {'Succeed': False, 'ErrorCode': 202, 'Error': e}
             logging.info('get_functional_tool_groups_Info error:%s' % e)
         return json.JSONEncoder().encode(res)
+
+    @http.route('/AutoDeviceApi/PutToolParameter', type='http', auth='none', methods=['GET', 'POST'], csrf=False,
+                cors="*")
+    def put_tool_preset_parameter_port(self, **kw):
+        """
+        刀具预调仪接口
+        :param kw:
+        :return:
+        """
+        logging.info('put_tool_preset_parameter_port:%s' % kw)
+        res = {'Succeed': True, 'Datas': []}
+        try:
+            datas = request.httprequest.data
+            ret = str(datas, 'utf-8')
+            data_lists = ret.split(",")
+            data_list = [data.replace('+', '') for data in data_lists]
+            logging.info(data_list)
+            tool_assembly = request.env['sf.functional.tool.assembly'].sudo().search(
+                [('assembly_order_code', '=', data_list[0]), ('start_preset_bool', '=', True)])
+            if not tool_assembly:
+                return json.JSONEncoder().encode(
+                    {'Succeed': False, 'ErrorCode': 201, 'code': data_list[0], 'Error': '没有找到正在组装的组装单！'})
+            tool_assembly.write({
+                'after_assembly_tool_loading_length': float(data_list[1] or "0"),  # 高度(总长度)
+                'after_assembly_functional_tool_diameter': float(data_list[2] or "0"),  # 直径
+                'after_assembly_knife_tip_r_angle': float(data_list[3] or "0")  # R角
+            })
+        except Exception as e:
+            res = {'Succeed': False, 'ErrorCode': 202, 'Error': e}
+            logging.info('put_tool_preset_parameter_port error:%s' % e)
+        return json.JSONEncoder().encode(res)
diff --git a/sf_tool_management/models/__init__.py b/sf_tool_management/models/__init__.py
index b589e095..b6020280 100644
--- a/sf_tool_management/models/__init__.py
+++ b/sf_tool_management/models/__init__.py
@@ -6,4 +6,5 @@ from . import mrp_workorder
 from . import functional_tool_enroll
 from . import fixture_material_search
 from . import fixture_enroll
+from . import temporary_data_processing_methods
 
diff --git a/sf_tool_management/models/base.py b/sf_tool_management/models/base.py
index 4a440df6..e840224f 100644
--- a/sf_tool_management/models/base.py
+++ b/sf_tool_management/models/base.py
@@ -538,12 +538,13 @@ class FunctionalToolAssembly(models.Model):
     chuck_name = fields.Char('')
     # ==============================================
     # 组装功能刀具参数信息
+    start_preset_bool = fields.Boolean('开始预调', default=False)
     barcode_id = fields.Many2one('stock.lot', string='功能刀具序列号', readonly=True)
     after_assembly_functional_tool_name = fields.Char(string='组装后功能刀具名称', readonly=True)
     after_assembly_functional_tool_type_id = fields.Many2one('sf.functional.cutting.tool.model',
                                                              string='组装后功能刀具类型', readonly=True)
-    after_assembly_functional_tool_diameter = fields.Float(string='组装后功能刀具直径(mm)', readonly=True)
-    after_assembly_knife_tip_r_angle = fields.Float(string='组装后刀尖R角(mm)', readonly=True)
+    after_assembly_functional_tool_diameter = fields.Float(string='组装后功能刀具直径(mm)', readonly=True, digits=(10, 3))
+    after_assembly_knife_tip_r_angle = fields.Float(string='组装后刀尖R角(mm)', readonly=True, digits=(10, 3))
     after_assembly_new_former = fields.Selection([('0', '新'), ('1', '旧')], string='组装后新/旧', readonly=True)
     cut_time = fields.Integer(string='已切削时间(min)', readonly=True)
     cut_length = fields.Float(string='已切削长度(mm)', readonly=True)
@@ -555,8 +556,9 @@ class FunctionalToolAssembly(models.Model):
     after_assembly_max_lifetime_value = fields.Integer(string='组装后最大寿命值(min)', readonly=True)
     after_assembly_alarm_value = fields.Integer(string='组装后报警值(min)', readonly=True)
     after_assembly_used_value = fields.Integer(string='组装后已使用值(min)', readonly=True)
-    after_assembly_tool_loading_length = fields.Float(string='组装后总长度(mm)', readonly=True)
-    after_assembly_functional_tool_length = fields.Float(string='组装后伸出长(mm)', readonly=True)
+    after_assembly_tool_loading_length = fields.Float(string='组装后总长度(mm)', readonly=True, digits=(10, 3))
+    after_assembly_handle_length = fields.Float(string='组装后刀柄长度(mm)',readonly=True, digits=(10, 3))
+    after_assembly_functional_tool_length = fields.Float(string='组装后伸出长(mm)', readonly=True, digits=(10, 3))
     after_assembly_effective_length = fields.Float(string='组装后有效长(mm)', readonly=True)
     L_D_number = fields.Float(string='L/D值(mm)', readonly=True)
     hiding_length = fields.Float(string='避空长(mm)', readonly=True)
@@ -574,29 +576,64 @@ class FunctionalToolAssembly(models.Model):
 
     active = fields.Boolean(string='已归档', default=True)
 
+    def put_start_preset(self):
+        self.search([('start_preset_bool', '=', True)]).write({'start_preset_bool': False})
+        self.write({
+            'after_assembly_tool_loading_length': 0,
+            'after_assembly_functional_tool_diameter': 0,
+            'after_assembly_knife_tip_r_angle': 0,
+            'start_preset_bool': True
+        })
+        return {
+            'type': 'ir.actions.act_window',
+            'res_model': 'sf.functional.tool.assembly.order',
+            'name': '功能刀具组装单',
+            'view_mode': 'form',
+            'target': 'new',
+            'context': {'default_name': self.name,
+                        'default_assembly_order_code': self.assembly_order_code,
+                        'default_production_line_name_id': self.production_line_name_id.id,
+                        'default_machine_tool_name_id': self.machine_tool_name_id.id,
+                        'default_cutter_spacing_code_id': self.cutter_spacing_code_id.id,
+                        'default_functional_tool_name': self.functional_tool_name,
+                        'default_functional_tool_type_id': self.functional_tool_type_id.id,
+                        'default_tool_groups_id': self.tool_groups_id.id,
+                        'default_functional_tool_diameter': self.functional_tool_diameter,
+                        'default_knife_tip_r_angle': self.knife_tip_r_angle,
+                        'default_tool_loading_length': self.tool_loading_length,
+                        'default_functional_tool_length': self.functional_tool_length,
+                        'default_effective_length': self.effective_length,
+                        'default_whether_standard_knife': self.whether_standard_knife,
+                        'default_coarse_middle_thin': self.coarse_middle_thin,
+                        'default_new_former': self.new_former,
+                        'default_use_tool_time': self.use_tool_time,
+                        'default_reason_for_applying': self.reason_for_applying
+                        }
+        }
+
     def _get_code(self, loading_task_source):
         """
         自动生成组装单编码
         """
         new_time = str(fields.Date.today())
-        datetime = new_time[2:4] + new_time[5:7] + new_time[-2:]
+        datetime = new_time[2:4] + new_time[5:7]
+        if loading_task_source == '0':
+            code = 'C' + datetime
+        elif loading_task_source == '1':
+            code = 'J' + datetime
+        elif loading_task_source == '2':
+            code = 'K' + datetime
+        else:
+            code = False
         functional_tool_assembly = self.env['sf.functional.tool.assembly'].sudo().search(
             [('loading_task_source', '=', loading_task_source),
-             ('assembly_order_code', 'ilike', datetime)], limit=1, order="id desc")
+             ('assembly_order_code', 'ilike', code)], limit=1, order="id desc")
         if not functional_tool_assembly:
             num = "%03d" % 1
         else:
             m = int(functional_tool_assembly.assembly_order_code[-3:]) + 1
             num = "%03d" % m
-        if loading_task_source == '0':
-            code = 'CAMZZD' + datetime + str(num)
-        elif loading_task_source == '1':
-            code = 'JTZZD' + datetime + str(num)
-        elif loading_task_source == '2':
-            code = 'MTSZZD' + datetime + str(num)
-        else:
-            code = False
-        return code
+        return code + str(num)
 
     def get_functional_tool(self, val):
         functional_tools = self.env['sf.functional.tool.assembly'].search(
diff --git a/sf_tool_management/models/functional_tool.py b/sf_tool_management/models/functional_tool.py
index 52565174..6f7e14bb 100644
--- a/sf_tool_management/models/functional_tool.py
+++ b/sf_tool_management/models/functional_tool.py
@@ -25,12 +25,13 @@ class FunctionalCuttingToolEntity(models.Model):
     sf_cutting_tool_type_id = fields.Many2one('sf.functional.cutting.tool.model', string='功能刀具类型',
                                               group_expand='_read_group_mrs_cutting_tool_type_id', compute_sudo=True)
 
-    functional_tool_diameter = fields.Float(string='刀具直径(mm)', readonly=True)
-    knife_tip_r_angle = fields.Float(string='刀尖R角(mm)', readonly=True)
+    functional_tool_diameter = fields.Float(string='刀具直径(mm)', readonly=True, digits=(10, 3))
+    knife_tip_r_angle = fields.Float(string='刀尖R角(mm)', readonly=True, digits=(10, 3))
     coarse_middle_thin = fields.Selection([("1", "粗"), ('2', '中'), ('3', '精')], string='粗/中/精', readonly=True)
     new_former = fields.Selection([('0', '新'), ('1', '旧')], string='新/旧', readonly=True)
-    tool_loading_length = fields.Float(string='总长度(mm)', readonly=True)
-    functional_tool_length = fields.Float(string='伸出长(mm)', readonly=True)
+    tool_loading_length = fields.Float(string='总长度(mm)', readonly=True, digits=(10, 3))
+    handle_length = fields.Float(string='刀柄长度(mm)',readonly=True, digits=(10, 3))
+    functional_tool_length = fields.Float(string='伸出长(mm)', readonly=True, digits=(10, 3))
     effective_length = fields.Float(string='有效长(mm)', readonly=True)
     tool_room_num = fields.Integer(string='刀具房数量', readonly=True)
     line_edge_knife_library_num = fields.Integer(string='线边刀库数量', readonly=True)
@@ -51,13 +52,6 @@ class FunctionalCuttingToolEntity(models.Model):
     safe_inventory_id = fields.Many2one('sf.real.time.distribution.of.functional.tools',
                                         string='功能刀具安全库存', readonly=True)
 
-    def button_safe_inventory_id(self):
-        """更新功能刀具关联的安全库存记录"""
-        tool_is = self.search([])
-        for item in tool_is:
-            item.safe_inventory_id = self.env['sf.real.time.distribution.of.functional.tools'].search(
-                [('functional_name_id', '=', item.tool_name_id.id)])[0]
-
     @api.depends('barcode_id.quant_ids', 'functional_tool_status')
     def _compute_current_location_id(self):
         for record in self:
diff --git a/sf_tool_management/models/functional_tool_enroll.py b/sf_tool_management/models/functional_tool_enroll.py
index e69ebdd8..8891b287 100644
--- a/sf_tool_management/models/functional_tool_enroll.py
+++ b/sf_tool_management/models/functional_tool_enroll.py
@@ -216,6 +216,7 @@ class FunctionalCuttingToolEntity(models.Model):
                         'coarse_middle_thin': item.coarse_middle_thin,
                         'new_former': item.new_former,
                         'tool_loading_length': item.tool_loading_length,
+                        'handle_length': item.handle_length,
                         'functional_tool_length': item.functional_tool_length,
                         'effective_length': item.effective_length,
                         'max_lifetime_value': item.max_lifetime_value,
diff --git a/sf_tool_management/models/temporary_data_processing_methods.py b/sf_tool_management/models/temporary_data_processing_methods.py
new file mode 100644
index 00000000..e63caff7
--- /dev/null
+++ b/sf_tool_management/models/temporary_data_processing_methods.py
@@ -0,0 +1,38 @@
+from odoo import fields, models, api
+
+
+class FunctionalCuttingToolEntity(models.Model):
+    _inherit = 'sf.functional.cutting.tool.entity'
+
+    def button_safe_inventory_id(self):
+        """更新功能刀具关联的安全库存记录"""
+        tool_is = self.search([])
+        for item in tool_is:
+            item.safe_inventory_id = self.env['sf.real.time.distribution.of.functional.tools'].search(
+                [('functional_name_id', '=', item.tool_name_id.id)])[0]
+
+
+class FunctionalToolAssembly(models.Model):
+    _inherit = 'sf.functional.tool.assembly'
+
+    def put_assembly_order_code(self):
+        assembly_list = self.search([('assemble_status', '=', '0')], order="id asc")
+        for item in assembly_list:
+            code = item.assembly_order_code[-9:-5]
+            if item.loading_task_source == '0':
+                code = 'C' + code
+            elif item.loading_task_source == '1':
+                code = 'J' + code
+            elif item.loading_task_source == '2':
+                code = 'K' + code
+
+            functional_tool_assembly = self.env['sf.functional.tool.assembly'].sudo().search(
+                [('loading_task_source', '=', item.loading_task_source),
+                 ('assembly_order_code', 'ilike', code)], limit=1, order="id desc")
+            if not functional_tool_assembly:
+                num = "%04d" % 1
+            else:
+                m = int(functional_tool_assembly.assembly_order_code[-3:]) + 1
+                num = "%04d" % m
+
+            item.assembly_order_code = "%s%s" % (code, num)
diff --git a/sf_tool_management/views/functional_tool_views.xml b/sf_tool_management/views/functional_tool_views.xml
index 90dfbb42..76607a16 100644
--- a/sf_tool_management/views/functional_tool_views.xml
+++ b/sf_tool_management/views/functional_tool_views.xml
@@ -155,24 +155,25 @@
                                     <group>
                                         <field name="functional_tool_diameter"/>
                                         <field name="knife_tip_r_angle"/>
-                                        <field name="whether_standard_knife"/>
-                                        <field name="coarse_middle_thin"/>
+                                        <field name="tool_loading_length"/>
+                                        <field name="handle_length"/>
+                                        <field name="functional_tool_length"/>
                                         <field name="max_lifetime_value"/>
                                         <field name="alarm_value"/>
-                                        <field name="used_value"/>
+                                        <field name="used_value" invisible="1"/>
                                         <field name="current_location_id" invisible="1"/>
-                                        <field name="current_location"/>
                                     </group>
                                     <group>
-                                        <field name="tool_loading_length"/>
-                                        <field name="functional_tool_length"/>
-                                        <field name="effective_length"/>
-                                        <field name="L_D_number"/>
-                                        <field name="hiding_length"/>
+                                        <field name="whether_standard_knife"/>
+                                        <field name="coarse_middle_thin"/>
+                                        <field name="effective_length" invisible="1"/>
+                                        <field name="L_D_number" invisible="1"/>
+                                        <field name="hiding_length" invisible="1"/>
                                         <field name="new_former"/>
                                         <field name="cut_time" attrs="{'invisible': [('new_former','=','0')]}"/>
                                         <field name="cut_length" attrs="{'invisible': [('new_former','=','0')]}"/>
                                         <field name="cut_number" attrs="{'invisible': [('new_former','=','0')]}"/>
+                                        <field name="current_location" string="当前位置"/>
                                     </group>
                                 </group>
                             </page>
diff --git a/sf_tool_management/views/tool_base_views.xml b/sf_tool_management/views/tool_base_views.xml
index 06a60b1c..0b00be26 100644
--- a/sf_tool_management/views/tool_base_views.xml
+++ b/sf_tool_management/views/tool_base_views.xml
@@ -451,36 +451,9 @@
                     <field name="whether_standard_knife" invisible="True"/>
                     <field name="reason_for_applying" invisible="True"/>
                     <field name="functional_tool_type_id" invisible="True"/>
-                    <!--                    <field name="functional_tool_cutting_type" invisible="True"/>-->
-
-                    <button string="组装"
-                            name="%(sf_tool_management.sf_functional_tool_assembly_order_act)d"
-                            type="action"
-                            context="{'default_name':name,
-                                    'default_assembly_order_code':assembly_order_code,
-                                    'default_production_line_name_id':production_line_name_id,
-                                    'default_machine_tool_name_id':machine_tool_name_id,
-                                    'default_cutter_spacing_code_id':cutter_spacing_code_id,
-                                    'default_functional_tool_name':functional_tool_name,
-                                    'default_functional_tool_type_id':functional_tool_type_id,
-                                    'default_tool_groups_id': tool_groups_id,
-                                    'default_functional_tool_diameter':functional_tool_diameter,
-                                    'default_knife_tip_r_angle':knife_tip_r_angle,
-                                    'default_tool_loading_length':tool_loading_length,
-                                    'default_functional_tool_length':functional_tool_length,
-                                    'default_effective_length':effective_length,
-                                    'default_whether_standard_knife':whether_standard_knife,
-                                    'default_coarse_middle_thin':coarse_middle_thin,
-                                    'default_new_former':new_former,
-                                    'default_use_tool_time':use_tool_time,
-                                    'default_reason_for_applying':reason_for_applying,
-                                    }"
-                            attrs="{'invisible': [('assemble_status', '!=', '0')]}" groups="sf_base.group_sf_mrp_user"
+                    <button string="组装" name="put_start_preset" type="object"
+                            attrs="{'invisible': [('assemble_status', '!=', '0')]}"
                             class="btn-primary"/>
-                    <!--                    <button string="组装单打印" name="assemble_single_print" type="object"-->
-                    <!--                            groups="sf_base.group_sf_mrp_user"-->
-                    <!--                            attrs="{'invisible': [('assemble_status', '=', '0')]}" class="btn-primary"-->
-                    <!--                            confirm="是否确认打印组装单"/>-->
                 </tree>
             </field>
         </record>
@@ -491,35 +464,11 @@
             <field name="arch" type="xml">
                 <form create="0" delete="0" edit="0">
                     <header>
-                        <button string="组装"
-                                name="%(sf_tool_management.sf_functional_tool_assembly_order_act)d"
-                                type="action" groups="sf_base.group_sf_mrp_user"
-                                context="{'default_name':name,
-                                    'default_assembly_order_code':assembly_order_code,
-                                    'default_production_line_name_id':production_line_name_id,
-                                    'default_machine_tool_name_id':machine_tool_name_id,
-                                    'default_cutter_spacing_code_id':cutter_spacing_code_id,
-                                    'default_functional_tool_name':functional_tool_name,
-                                    'default_functional_tool_type_id':functional_tool_type_id,
-                                    'default_tool_groups_id': tool_groups_id,
-                                    'default_functional_tool_diameter':functional_tool_diameter,
-                                    'default_knife_tip_r_angle':knife_tip_r_angle,
-                                    'default_tool_loading_length':tool_loading_length,
-                                    'default_functional_tool_length':functional_tool_length,
-                                    'default_effective_length':effective_length,
-                                    'default_whether_standard_knife':whether_standard_knife,
-                                    'default_coarse_middle_thin':coarse_middle_thin,
-                                    'default_new_former':new_former,
-                                    'default_use_tool_time':use_tool_time,
-                                    'default_reason_for_applying':reason_for_applying,
-                                    }"
+                        <button string="修改编码" name="put_assembly_order_code" type="object"
+                                class="btn-primary" confirm="是否确认修改编码"/>
+                        <button string="组装" name="put_start_preset" type="object"
                                 attrs="{'invisible': [('assemble_status', '!=', '0')]}"
                                 class="btn-primary"/>
-
-                        <!--                        <button string="组装单打印" name="assemble_single_print" type="object"-->
-                        <!--                                groups="sf_base.group_sf_mrp_user"-->
-                        <!--                                attrs="{'invisible': [('assemble_status', '=', '0')]}" class="btn-primary"-->
-                        <!--                                confirm="是否确认打印组装单"/>-->
                         <field name="assemble_status" widget="statusbar" statusbar_visible="0,1"/>
                     </header>
                     <sheet>
@@ -544,7 +493,7 @@
                             </group>
                         </group>
                         <notebook>
-                            <page string="组装信息" attrs="{'invisible': [('assemble_status', '=' ,'0')]}">
+                            <page string="组装信息" attrs="{'invisible': [('assemble_status', '=', '0')]}">
                                 <group col="1">
                                     <group col="1">
                                         <group>
@@ -557,9 +506,9 @@
                                                 <field name="after_assembly_functional_tool_type_id"
                                                        string="功能刀具类型"/>
                                                 <field name="tool_groups_id"/>
-                                                <field name="after_assembly_functional_tool_diameter"
-                                                       string="刀具直径(mm)"/>
-                                                <field name="after_assembly_knife_tip_r_angle" string="刀尖R角(mm)"/>
+                                                <field name="after_assembly_whether_standard_knife"
+                                                       string="是否标准刀"/>
+                                                <field name="after_assembly_coarse_middle_thin" string="粗/中/精"/>
                                                 <field name="after_assembly_new_former" string="新/旧"/>
                                                 <field name="cut_time"
                                                        attrs="{'invisible': [('after_assembly_new_former', '=', '0')]}"/>
@@ -569,19 +518,20 @@
                                                        attrs="{'invisible': [('after_assembly_new_former', '=', '0')]}"/>
                                             </group>
                                             <group>
-                                                <field name="after_assembly_whether_standard_knife"
-                                                       string="是否标准刀"/>
-                                                <field name="after_assembly_coarse_middle_thin" string="粗/中/精"/>
+                                                <field name="after_assembly_functional_tool_diameter"
+                                                       string="刀具直径(mm)"/>
+                                                <field name="after_assembly_knife_tip_r_angle" string="刀尖R角(mm)"/>
+                                                <field name="after_assembly_tool_loading_length" string="总长度(mm)"/>
+                                                <field name="after_assembly_handle_length" string="刀柄长度(mm)"/>
+                                                <field name="after_assembly_functional_tool_length"
+                                                       string="伸出长(mm)"/>
                                                 <field name="after_assembly_max_lifetime_value"
                                                        string="最大寿命值(min)"/>
                                                 <field name="after_assembly_alarm_value" string="报警值(min)"/>
-                                                <field name="after_assembly_used_value" string="已使用值(min)"/>
-                                                <field name="after_assembly_tool_loading_length" string="总长度(mm)"/>
-                                                <field name="after_assembly_functional_tool_length"
-                                                       string="伸出长(mm)"/>
-                                                <field name="after_assembly_effective_length" string="有效长(mm)"/>
-                                                <field name="L_D_number"/>
-                                                <field name="hiding_length"/>
+                                                <field name="after_assembly_used_value" string="已使用值(min)" invisible="1"/>
+                                                <field name="after_assembly_effective_length" string="有效长(mm)" invisible="1"/>
+                                                <field name="L_D_number" invisible="1"/>
+                                                <field name="hiding_length" invisible="1"/>
                                             </group>
                                         </group>
                                     </group>
diff --git a/sf_tool_management/wizard/wizard.py b/sf_tool_management/wizard/wizard.py
index ed208dfb..3ff8b5db 100644
--- a/sf_tool_management/wizard/wizard.py
+++ b/sf_tool_management/wizard/wizard.py
@@ -223,8 +223,8 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
 
     image = fields.Binary('图片')
 
-    @api.onchange('functional_tool_name')
-    def _onchange_functional_tool_name(self):
+    @api.depends('functional_tool_name')
+    def _compute_functional_tool_name(self):
         for item in self:
             if item.functional_tool_name:
                 inventory = self.env['sf.tool.inventory'].sudo().search([('name', '=', item.functional_tool_name)])
@@ -355,7 +355,7 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
 
     # ================刀柄型号===============
     handle_freight_rfid = fields.Char('刀柄Rfid', compute='_compute_rfid')
-    handle_code_id = fields.Many2one('stock.lot', '刀柄序列号', required=True,
+    handle_code_id = fields.Many2one('stock.lot', '刀柄序列号',
                                      domain=[('product_id.cutting_tool_material_id.name', '=', '刀柄'),
                                              ('tool_material_status', '=', '可用')])
     handle_product_id = fields.Many2one('product.product', string='刀柄名称', compute='_compute_handle_product_id',
@@ -456,15 +456,17 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
                 item.handle_freight_rfid = None
 
     # 组装功能刀具参数信息
-    after_name_id = fields.Many2one('sf.tool.inventory', string='功能刀具名称', required=True)
+    after_name_id = fields.Many2one('sf.tool.inventory', string='功能刀具名称', compute='_compute_functional_tool_name',
+                                    store=True)
     barcode_id = fields.Many2one('stock.lot', string='功能刀具序列号')
     rfid = fields.Char('Rfid', compute='_compute_rfid')
     code = fields.Char(string='功能刀具编码', compute='_compute_code')
     after_assembly_functional_tool_name = fields.Char(string='组装后功能刀具名称', compute='_compute_name', store=True)
     after_assembly_functional_tool_type_id = fields.Many2one('sf.functional.cutting.tool.model',
-                                                             string='组装后功能刀具类型')
-    after_assembly_functional_tool_diameter = fields.Float(string='组装后功能刀具直径(mm)')
-    after_assembly_knife_tip_r_angle = fields.Float(string='组装后刀尖R角(mm)')
+                                                             string='组装后功能刀具类型', store=True,
+                                                             compute='_compute_after_assembly_max_lifetime_value')
+    after_assembly_functional_tool_diameter = fields.Float(string='组装后功能刀具直径(mm)', digits=(10, 3))
+    after_assembly_knife_tip_r_angle = fields.Float(string='组装后刀尖R角(mm)', digits=(10, 3))
     after_assembly_new_former = fields.Selection([('0', '新'), ('1', '旧')], string='组装后新/旧', default='0')
     cut_time = fields.Integer(string='已切削时间(min)')
     cut_length = fields.Float(string='已切削长度(mm)')
@@ -473,15 +475,66 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
     after_assembly_whether_standard_knife = fields.Boolean(string='组装后是否标准刀', default=True)
     after_assembly_coarse_middle_thin = fields.Selection([("1", "粗"), ('2', '中'), ('3', '精')],
                                                          string='组装后粗/中/精', default='3')
-    after_assembly_max_lifetime_value = fields.Integer(string='组装后最大寿命值(min)')
+    after_assembly_max_lifetime_value = fields.Integer(string='组装后最大寿命值(min)', store=True,
+                                                       compute='_compute_after_assembly_max_lifetime_value')
     after_assembly_alarm_value = fields.Integer(string='组装后报警值(min)')
     after_assembly_used_value = fields.Integer(string='组装后已使用值(min)')
-    after_assembly_tool_loading_length = fields.Float(string='组装后总长度(mm)')
-    after_assembly_functional_tool_length = fields.Float(string='组装后伸出长(mm)', required=True)
+    after_assembly_tool_loading_length = fields.Float(string='组装后总长度(mm)', digits=(10, 3))
+    after_assembly_handle_length = fields.Float(string='组装后刀柄长度(mm)', digits=(10, 3))
+    after_assembly_functional_tool_length = fields.Float(string='组装后伸出长(mm)', digits=(10, 3),
+                                                         compute='_compute_after_assembly_functional_tool_length')
     after_assembly_effective_length = fields.Float(string='组装后有效长(mm)')
     L_D_number = fields.Float(string='L/D值(mm)', compute='_compute_l_d_number')
     hiding_length = fields.Float(string='避空长(mm)')
-    after_tool_groups_id = fields.Many2one('sf.tool.groups', string='组装后刀具组')
+    after_tool_groups_id = fields.Many2one('sf.tool.groups', string='组装后刀具组', store=True,
+                                           compute='_compute_after_assembly_max_lifetime_value')
+
+    obtain_measurement_status = fields.Boolean('是否获取测量值', default=False)
+
+    @api.depends('after_assembly_tool_loading_length', 'after_assembly_handle_length')
+    def _compute_after_assembly_functional_tool_length(self):
+        for item in self:
+            item.after_assembly_functional_tool_length = item.after_assembly_tool_loading_length - item.after_assembly_handle_length
+
+    @api.onchange('after_assembly_max_lifetime_value')
+    def _onchange_after_assembly_alarm_value(self):
+        for item in self:
+            if item.after_assembly_max_lifetime_value:
+                item.after_assembly_alarm_value = item.after_assembly_max_lifetime_value * 0.95
+
+    def get_tool_preset_parameter(self):
+        """
+        获取刀具预调仪数据
+        """
+        tool = self.env['sf.functional.tool.assembly'].search([('assembly_order_code', '=', self.assembly_order_code)])
+        tool_loading_length = tool.after_assembly_tool_loading_length
+        diameter = tool.after_assembly_functional_tool_diameter
+        r_angle = tool.after_assembly_knife_tip_r_angle
+        if tool_loading_length == 0 and diameter == 0 and r_angle == 0:
+            raise ValidationError('没有获取到测量数据！')
+        self.write({
+            'after_assembly_tool_loading_length': tool_loading_length,  # 总长度
+            'after_assembly_functional_tool_diameter': diameter,  # 直径
+            'after_assembly_knife_tip_r_angle': r_angle,  # R角
+            'obtain_measurement_status': True  # 是否获取测量值
+        })
+
+        return {
+            'type': 'ir.actions.act_window',
+            'res_model': 'sf.functional.tool.assembly.order',
+            'view_mode': 'form',
+            'res_id': self.id,
+            'target': 'new',
+            'flags': {'form': {'action_buttons': True, 'options': {'mode': 'modal'}}}
+        }
+
+    @api.depends('after_name_id')
+    def _compute_after_assembly_max_lifetime_value(self):
+        for item in self:
+            if item.after_name_id:
+                item.after_assembly_max_lifetime_value = item.after_name_id.life_span
+                item.after_assembly_functional_tool_type_id = item.after_name_id.functional_cutting_tool_model_id.id
+                item.after_tool_groups_id = item.after_name_id.tool_groups_id.id
 
     @api.onchange('after_name_id')
     def _onchange_number(self):
@@ -489,14 +542,12 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
             if item.after_name_id:
                 item.after_assembly_functional_tool_diameter = item.after_name_id.diameter
                 item.after_assembly_knife_tip_r_angle = item.after_name_id.angle
-                item.after_assembly_max_lifetime_value = item.after_name_id.life_span
                 item.after_assembly_tool_loading_length = item.after_name_id.tool_length
                 item.after_assembly_functional_tool_length = item.after_name_id.extension
                 item.hiding_length = item.after_name_id.blade_length
-                item.after_assembly_functional_tool_type_id = item.after_name_id.functional_cutting_tool_model_id.id
-                item.after_tool_groups_id = item.after_name_id.tool_groups_id.id
+
             else:
-                item.after_assembly_functional_tool_type_id = item.functional_tool_type_id
+                item.after_assembly_functional_tool_type_id = item.functional_tool_type_id.id
                 item.after_tool_groups_id = item.tool_groups_id.id
 
     # functional_tool_cutting_type = fields.Char(string='功能刀具切削类型', readonly=False)
@@ -574,24 +625,6 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
             else:
                 record.L_D_number = 0
 
-    @api.constrains('after_assembly_tool_loading_length', 'after_assembly_functional_tool_length',
-                    'after_assembly_max_lifetime_value', 'after_assembly_alarm_value',
-                    'after_assembly_effective_length', 'hiding_length')
-    def _check_length_control(self):
-        for obj in self:
-            if obj.after_assembly_tool_loading_length == 0:
-                raise ValidationError('组装参数信息【总长度】不能为0！！！')
-            if obj.after_assembly_functional_tool_length == 0:
-                raise ValidationError('组装参数信息【伸出长】不能为0！！！')
-            if obj.after_assembly_max_lifetime_value == 0:
-                raise ValidationError('组装参数信息【最大寿命值】不能为0！！！')
-            if obj.after_assembly_alarm_value == 0:
-                raise ValidationError('组装参数信息【报警值】不能为0！！！')
-            if obj.after_assembly_effective_length == 0:
-                raise ValidationError('组装参数信息【有效长】不能为0！！！')
-            if obj.hiding_length == 0:
-                raise ValidationError('组装参数信息【避空长】不能为0！！！')
-
     def functional_tool_assembly(self):
         """
         功能刀具组装
@@ -659,16 +692,39 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
 
     def materials_must_be_judged(self):
         """
-        功能刀具组装物料必填判断
+        功能刀具组装必填判断
         """
+        # 物料必填校验
+        if not self.handle_code_id:
+            raise ValidationError('缺少【刀柄】物料信息！')
         if not self.integral_product_id and not self.blade_product_id:
             raise ValidationError('【整体式刀具】和【刀片】必须填写一个！')
         if self.blade_product_id:
             if not self.bar_product_id and not self.pad_product_id:
                 raise ValidationError('【刀盘】和【刀杆】必须填写一个！')
+        # 组装参数必填校验
+        if self.after_assembly_functional_tool_length == 0:
+            raise ValidationError('组装参数信息【伸出长】不能为0！')
+        if self.after_assembly_max_lifetime_value == 0:
+            raise ValidationError('组装参数信息【最大寿命值】不能为0！')
+        if self.after_assembly_alarm_value == 0:
+            raise ValidationError('组装参数信息【报警值】不能为0！')
+        # if self.after_assembly_effective_length == 0:
+        #     raise ValidationError('组装参数信息【有效长】不能为0！！！')
+        # if self.hiding_length == 0:
+        #     raise ValidationError('组装参数信息【避空长】不能为0！！！')
+        if self.after_assembly_functional_tool_diameter == 0:
+            raise ValidationError('组装参数信息【刀具直径】不能为0！')
+        if self.after_assembly_tool_loading_length == 0:
+            raise ValidationError('组装参数信息【总长度】不能为0！！！')
+        if self.after_assembly_handle_length == 0:
+            raise ValidationError('组装参数信息【刀柄长度】不能为0！')
+        if self.after_assembly_tool_loading_length < self.after_assembly_handle_length:
+            raise ValidationError('组装参数信息【刀柄长度】不能大于【总长度】！')
 
     def get_desc_1(self, stock_lot):
         return {
+            'start_preset_bool': False,
             'barcode_id': stock_lot.id,
             'code': self.code,
             'rfid': self.rfid,
@@ -694,6 +750,7 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
             'after_assembly_alarm_value': self.after_assembly_alarm_value,
             'after_assembly_used_value': self.after_assembly_used_value,
             'after_assembly_tool_loading_length': self.after_assembly_tool_loading_length,
+            'after_assembly_handle_length': self.after_assembly_handle_length,
             'after_assembly_functional_tool_length': self.after_assembly_functional_tool_length,
             'after_assembly_effective_length': self.after_assembly_effective_length,
             'L_D_number': self.L_D_number,
@@ -726,6 +783,7 @@ class FunctionalToolAssemblyOrder(models.TransientModel):
             'coarse_middle_thin': self.after_assembly_coarse_middle_thin,
             'new_former': self.after_assembly_new_former,
             'tool_loading_length': self.after_assembly_tool_loading_length,
+            'handle_length': self.after_assembly_handle_length,
             'functional_tool_length': self.after_assembly_functional_tool_length,
             'effective_length': self.after_assembly_effective_length,
 
@@ -918,7 +976,6 @@ class StockLot(models.Model):
         })
         return stock_move_id, stock_move_line_id
 
-
 # class StockQuant(models.Model):
 #     _inherit = 'stock.quant'
 #
diff --git a/sf_tool_management/wizard/wizard_view.xml b/sf_tool_management/wizard/wizard_view.xml
index 636f94f7..955bb998 100644
--- a/sf_tool_management/wizard/wizard_view.xml
+++ b/sf_tool_management/wizard/wizard_view.xml
@@ -166,11 +166,12 @@
                 <sheet>
                     <div class="oe_title">
                         <h1>
-                            <field name="production_line_name_id"/>
+                            <field name="assembly_order_code"/>
                         </h1>
                     </div>
                     <group>
                         <group>
+                            <field name="production_line_name_id"/>
                             <field name="machine_tool_name_id"/>
                             <field name="cutter_spacing_code_id"/>
                         </group>
@@ -178,24 +179,26 @@
                             <field name="image" nolabel="1" widget="image"/>
                         </group>
                     </group>
-                    <group string="功能刀具申请信息">
+                    <group string="功能刀具申请信息" col="1">
                         <group>
-                            <field name="functional_tool_name"/>
-                            <field name="functional_tool_type_id"/>
-                            <field name="tool_groups_id"/>
-                            <field name="functional_tool_diameter" string="刀具直径(mm)"/>
-                            <field name="knife_tip_r_angle"/>
-                            <field name="tool_loading_length"/>
-                            <field name="functional_tool_length"/>
-                            <field name="effective_length"/>
-                        </group>
-                        <group>
-                            <field name="whether_standard_knife"/>
-                            <field name="coarse_middle_thin"/>
-                            <field name="new_former"/>
-                            <field name="use_tool_time"/>
-                            <field name="reason_for_applying"/>
-                            <!--                            <field name="functional_tool_cutting_type"/>-->
+                            <group>
+                                <field name="functional_tool_name"/>
+                                <field name="functional_tool_type_id"/>
+                                <field name="tool_groups_id"/>
+                                <field name="functional_tool_diameter" string="刀具直径(mm)"/>
+                                <field name="knife_tip_r_angle"/>
+                                <field name="tool_loading_length"/>
+                                <field name="functional_tool_length"/>
+                                <field name="effective_length"/>
+                            </group>
+                            <group>
+                                <field name="whether_standard_knife"/>
+                                <field name="coarse_middle_thin"/>
+                                <field name="new_former"/>
+                                <field name="use_tool_time"/>
+                                <field name="reason_for_applying"/>
+                                <!--                            <field name="functional_tool_cutting_type"/>-->
+                            </group>
                         </group>
                     </group>
                     <group string="组装物料信息" col="1">
@@ -330,53 +333,66 @@
                         </group>
                     </group>
 
-                    <group string="组装参数信息">
+                    <group string="组装参数信息" col="1">
                         <group>
                             <group>
                                 <field name="barcode_id" invisible="True"/>
                                 <field name="code" readonly="True"/>
                                 <field name="rfid" class="custom_required"/>
-                                <field name="after_name_id" string="功能刀具名称" placeholder="请选择功能刀具名称"
+                            </group>
+                            <group>
+                                <field name="obtain_measurement_status" invisible="1"/>
+                                <button name="get_tool_preset_parameter" string="获取测量值" type="object"
+                                        class="btn-primary"/>
+                            </group>
+                        </group>
+                        <group>
+                            <group>
+                                <field name="after_name_id" string="功能刀具名称" placeholder="请选择功能刀具名称" readonly="1"
                                        options="{'no_create': True, 'no_quick_create': True}"/>
-                                <field name="after_assembly_functional_tool_name" string="功能刀具名称" invisible="1"/>
-                                <field name="after_assembly_functional_tool_type_id" string="功能刀具类型"
+                                <field name="after_assembly_functional_tool_name" string="功能刀具名称"
+                                       invisible="1"/>
+                                <field name="after_assembly_functional_tool_type_id" string="功能刀具类型" readonly="1"
                                        options="{'no_create': True, 'no_quick_create': True}"/>
-                                <field name="after_tool_groups_id"
+                                <field name="after_tool_groups_id" readonly="1"
                                        options="{'no_create': True, 'no_quick_create': True}"/>
-                                <field name="after_assembly_functional_tool_diameter" string="刀具直径(mm)"
-                                       class="custom_required"/>
-                                <field name="after_assembly_knife_tip_r_angle" string="刀尖R角(mm)"
-                                       class="custom_required"/>
+                                <field name="after_assembly_whether_standard_knife" string="是否标准刀"/>
+                                <field name="after_assembly_coarse_middle_thin" string="粗/中/精"/>
                                 <field name="after_assembly_new_former" string="新/旧"/>
-                                <field name="cut_time" attrs="{'invisible': [('after_assembly_new_former','=','0')]}"/>
+                                <field name="cut_time"
+                                       attrs="{'invisible': [('after_assembly_new_former','=','0')]}"/>
                                 <field name="cut_length"
                                        attrs="{'invisible': [('after_assembly_new_former','=','0')]}"/>
                                 <field name="cut_number"
                                        attrs="{'invisible': [('after_assembly_new_former','=','0')]}"/>
                             </group>
-                        </group>
-                        <group>
                             <group>
-                                <field name="after_assembly_whether_standard_knife" string="是否标准刀"/>
-                                <field name="after_assembly_coarse_middle_thin" string="粗/中/精"/>
-                                <field name="after_assembly_max_lifetime_value" string="最大寿命值(min)"
-                                       class="custom_required"/>
-                                <field name="after_assembly_alarm_value" string="报警值(min)" class="custom_required"/>
-                                <field name="after_assembly_used_value" string="已使用值(min)"/>
+                                <field name="after_assembly_functional_tool_diameter" string="刀具直径(mm)"
+                                       class="custom_required" readonly="1"/>
+                                <field name="after_assembly_knife_tip_r_angle" string="刀尖R角(mm)"
+                                       class="custom_required" readonly="1"/>
                                 <field name="after_assembly_tool_loading_length" string="总长度(mm)"
+                                       class="custom_required" readonly="1"/>
+                                <field name="after_assembly_handle_length" string="刀柄长度(mm)"
                                        class="custom_required"/>
                                 <field name="after_assembly_functional_tool_length" string="伸出长(mm)"
                                        class="custom_required"/>
-                                <field name="after_assembly_effective_length" string="有效长(mm)"
+                                <field name="after_assembly_max_lifetime_value" string="最大寿命值(min)"
                                        class="custom_required"/>
-                                <field name="hiding_length" class="custom_required"/>
-                                <field name="L_D_number"/>
+                                <field name="after_assembly_alarm_value" string="报警值(min)"
+                                       class="custom_required"/>
+                                <field name="after_assembly_used_value" string="已使用值(min)" invisible="1"/>
+                                <field name="after_assembly_effective_length" string="有效长(mm)" invisible="1"
+                                       class="custom_required"/>
+                                <field name="hiding_length" class="custom_required" invisible="1"/>
+                                <field name="L_D_number" invisible="1"/>
                             </group>
                         </group>
                     </group>
                 </sheet>
                 <footer>
                     <button string="确定" name="functional_tool_assembly" type="object" class="btn-primary"
+                            attrs="{'invisible': [('obtain_measurement_status', '=', False)]}"
                             confirm="是否确认申请组装"/>
                     <button string="取消" class="btn-secondary" special="cancel"/>
                 </footer>