Accept Merge Request #963: (feature/优化agv -> develop)

Merge Request: 优化agv及站点位置和对应接口

Created By: @杨金灵
Reviewed By: @马广威
Approved By: @马广威 
Accepted By: @杨金灵
URL: https://jikimo-hn.coding.net/p/jikimo_sfs/d/jikimo_sf/git/merge/963?initial=true

sf_manufacturing/controllers/controllers.py

@@ -432,7 +432,7 @@ class Manufacturing_Connect(http.Controller):
                 logging.info('DeviceId:%s' % ret['DeviceId'])
                 workpiece_delivery = request.env['sf.workpiece.delivery'].sudo().search(
                     [('feeder_station_start_id.name', '=', ret['DeviceId']),
-                     ('status', '=', '待配送')], limit=1, order='id asc')
+                     ('status', '=', '已配送'), ('type', '=', '上产线')], order='id asc')
                 if workpiece_delivery:
                     for wd in workpiece_delivery:
                         logging.info('wd.production_id:%s' % wd.production_id.name)
@@ -441,7 +441,7 @@ class Manufacturing_Connect(http.Controller):
                             wd.production_id.write({'production_line_state': '已上产线'})
                             wd.write({'production_line_state': '已上产线'})
                 else:
-                    res = {'Succeed': False, 'ErrorCode': 203, 'Error': '该DeviceId没有对应的工件配送数据'}
+                    res = {'Succeed': False, 'ErrorCode': 203, 'Error': '该DeviceId没有对应的已配送工件数据'}
             else:
                 res = {'Succeed': False, 'ErrorCode': 201, 'Error': '未传DeviceId字段'}
         except Exception as e:
@@ -466,26 +466,16 @@ class Manufacturing_Connect(http.Controller):
             if 'DeviceId' in ret:
                 logging.info('DeviceId:%s' % ret['DeviceId'])
                 workpiece_delivery = request.env['sf.workpiece.delivery'].sudo().search(
-                    [('feeder_station_destination_id.name', '=', ret['DeviceId']),
-                     ('status', '=', '待配送')], limit=1, order='id asc')
+                    [('feeder_station_start_id.name', '=', ret['DeviceId']),
+                     ('status', '=', '已配送'), ('type', '=', '上产线')], order='id asc')
                 if workpiece_delivery:
                     for wd in workpiece_delivery:
                         logging.info('wd.production_id:%s' % wd.production_id.name)
                         if wd.workorder_id.state == 'done' and wd.production_id.production_line_state == '已上产线':
                             logging.info('wd.production_line_state:%s' % wd.production_id.production_line_state)
-                            workpiece_delivery_off = request.env['sf.workpiece.delivery'].sudo().create({
-                                'production_id': wd.production_id.id,
-                                'feeder_station_start_id': workpiece_delivery.feeder_station_start_id.id,
-                                'feeder_station_destination_id': '',
-                                'workorder_id': workpiece_delivery.workorder_id.id,
-                                'workpiece_code': workpiece_delivery.workpiece_code,
-                                'production_line_id': workpiece_delivery.production_line_id.id,
-                                'task_delivery_time': datetime.now(),
-                                'production_line_state': '已下产线'
-                            })
                             wd.production_id.write({'production_line_state': '已下产线'})
                             logging.info('开始向agv下发下产线任务')
-                            workpiece_delivery_off._delivery_avg()
+                            wd._delivery_avg()
                             logging.info('agv下发下产线任务已配送')
 
                 else:

sf_manufacturing/controllers/workpiece.py

@@ -28,6 +28,11 @@ class Workpiece(http.Controller):
                             [('production_id.name', '=', ret['reqCode']), ('agv_task_code'), '=', ret['taskCode']])
                         if workpiece_delivery:
                             workpiece_delivery.write({'status': '已配送', 'task_completion_time': ret['reqTime']})
+                            if workpiece_delivery.type == '下产线':
+                                workpiece_delivery_clear = request.env['sf.workpiece.delivery'].sudo().search(
+                                    [('production_id.name', '=', ret['reqCode']), ('type', '=', '运送空料架')])
+                                if workpiece_delivery_clear:
+                                    workpiece_delivery_clear._delivery_avg()
                         else:
                             res = {'Succeed': False, 'ErrorCode': 203, 'Error': '该reqCode暂未查到对应的工件配送记录'}
                 else:

sf_manufacturing/models/agv_setting.py

@@ -1,4 +1,6 @@
 # -*- coding: utf-8 -*-
+import requests
+import logging
 from odoo import fields, models
 
 
@@ -13,6 +15,23 @@ class AgvSetting(models.Model):
         ('占用', '占用'),
         ('空闲', '空闲')], string='状态')
     divide_the_work = fields.Char('主要分工')
+    active = fields.Boolean('有效', default=True)
+
+    def update_site_state(self):
+        # 调取中控的接驳站接口并修改对应站点的状态
+        config = self.env['res.config.settings'].get_values()
+        # token = sf_sync_config['token'Ba F2CF5DCC-1A00-4234-9E95-65603F70CC8A]
+        headers = {'Authorization': config['center_control_Authorization']}
+        center_control_url = config['center_control_url'] + "/AutoDeviceApi/GetAgvStationState"
+        center_control_r = requests.get(center_control_url, params={}, headers=headers)
+        ret = center_control_r.json()
+        logging.info('工件配送-请求中控站点信息:%s' % ret)
+        datas = ret['Datas']
+        for item in self:
+            for da in datas:
+                if da['DeviceId'] == item.name:
+                    if da['AtHome'] is True:
+                        item.state = '占用'
 
 
 class AgvTaskRoute(models.Model):

sf_manufacturing/models/mrp_workorder.py

@@ -458,360 +458,376 @@ class ResMrpWorkOrder(models.Model):
             'date_planned_finished': False,
             'duration_expected': duration_expected,
             'duration': 0,
-            'workpiece_delivery_ids': False if not route.routing_type == '装夹预调' else self.env[
-                'sf.workpiece.delivery'].create(
-                {'production_id': production.id})
+            'workpiece_delivery_ids': False if not route.routing_type == '装夹预调' else self._json_workpiece_delivery_list(
+                production)
         }]
         return workorders_values_str
 
-    # 拼接工单对象属性值(表面工艺)
-    def _json_workorder_surface_process_str(self, production, route, process_parameter, supplier_id):
-        workorders_values_str = [0, '', {
-            'product_uom_id': production.product_uom_id.id,
-            'qty_producing': 0,
-            'operation_id': False,
-            'name': '%s-%s' % (route.name, process_parameter.name),
-            'processing_panel': '',
-            'routing_type': '表面工艺',
-            'surface_technics_parameters_id': process_parameter.id,
-            'work_state': '',
-            'supplier_id': supplier_id,
-            'is_subcontract': True if process_parameter.gain_way == '外协' else False,
-            'workcenter_id': self.env[
-                'mrp.workcenter'].get_process_outsourcing_workcenter() if process_parameter.gain_way == '外协' else
-            self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids,
-                                                              route.routing_type,
-                                                              production.product_id),
-            'date_planned_start': False,
-            'date_planned_finished': False,
-            'duration_expected': 60,
-            'duration': 0
-        }]
-        return workorders_values_str
+    def _json_workpiece_delivery_list(self, production):
+        return [
+            [0, '', {'production_id': production.id, 'type': '上产线'}],
+            [0, '', {'production_id': production.id, 'type': '下产线'}],
+            [0, '', {'production_id': production.id, 'type': '运送空料架'}],
+        ]
+
+
+# 拼接工单对象属性值(表面工艺)
+def _json_workorder_surface_process_str(self, production, route, process_parameter, supplier_id):
+    workorders_values_str = [0, '', {
+        'product_uom_id': production.product_uom_id.id,
+        'qty_producing': 0,
+        'operation_id': False,
+        'name': '%s-%s' % (route.name, process_parameter.name),
+        'processing_panel': '',
+        'routing_type': '表面工艺',
+        'surface_technics_parameters_id': process_parameter.id,
+        'work_state': '',
+        'supplier_id': supplier_id,
+        'is_subcontract': True if process_parameter.gain_way == '外协' else False,
+        'workcenter_id': self.env[
+            'mrp.workcenter'].get_process_outsourcing_workcenter() if process_parameter.gain_way == '外协' else
+        self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids,
+                                                          route.routing_type,
+                                                          production.product_id),
+        'date_planned_start': False,
+        'date_planned_finished': False,
+        'duration_expected': 60,
+        'duration': 0
+    }]
+    return workorders_values_str
+
+
+#  维修模块按钮
+def button_maintenance_req(self):
+    self.ensure_one()
+    return {
+        'name': _('New Maintenance Request'),
+        'view_mode': 'form',
+        'views': [(self.env.ref('mrp_maintenance.maintenance_request_view_form_inherit_mrp').id, 'form')],
+        'res_model': 'maintenance.request',
+        'type': 'ir.actions.act_window',
+        'context': {
+            'default_company_id': self.company_id.id,
+            'default_workorder_id': self.id,
+            'default_production_id': self.production_id.id,
+            'discard_on_footer_button': True,
+        },
+        'target': 'new',
+        'domain': [('workorder_id', '=', self.id)]
+    }
+
+
+# tray_id = fields.Many2one('sf.tray', string="托盘信息", tracking=True)
+
+# 扫码绑定托盘方法
+
+# def gettray(self):
+#     if self.tray_code != False:
+#         values = self.env['sf.tray'].search([("code", "=", self.tray_code)])
+#         if values:
+#             if values.state == "占用":
+#                 raise UserError('该托盘已占用')
+#             if values.state == "报损":
+#                 raise UserError('该托盘已损坏')
+#             else:
+#                 values.update({
+#                     'workorder_id': self,
+#                     'production_id': self.production_id,
+#                     'state': '占用',
+#                 })
+#                 self.work_state = "已绑定"
+#                 orders = self.env['mrp.workorder'].search([('production_id', '=', self.production_id.id)])
+#                 for a in orders:
+#                     a.tray_id = values
+#         else:
+#             raise UserError('该托盘编码已失效')
+#     else:
+#         raise UserError('托盘码不能为空')
+
+# 验证坯料序列号是否正确
+def pro_code_is_ok(self, barcode):
+    if barcode is not False:
+        if barcode != self.pro_code:
+            raise UserError('坯料序列号错误')
+            return False
+        else:
+            return True
+
+
+pro_code = fields.Char(string='坯料序列号')
+
+pro_code_ok = fields.Boolean(default=False)
+
+
+# 托盘扫码绑定
+# def gettray_auto(self, barcode):
+#     if barcode != False:
+#         values = self.env['sf.tray'].search([("code", "=", barcode)])
+#
+#         if values:
+#             if values.state == "占用":
+#                 raise UserError('该托盘已占用')
+#             if values.state == "报损":
+#                 raise UserError('该托盘已损坏')
+#             else:
+#                 values.update({
+#                     'workorder_id': self,
+#                     'production_id': self.production_id,
+#                     'state': '占用',
+#                 })
+#                 self.work_state = "已绑定"
+#                 orders = self.env['mrp.workorder'].search([('production_id', '=', self.production_id.id)])
+#                 for a in orders:
+#                     a.tray_id = values
+#
+#                 return values
+#
+#                 # return {
+#                 #     'name': _('New Maintenance Request'),
+#                 #     'view_mode': 'form',
+#                 #     'res_model': 'maintenance.request',
+#                 #     'type': 'ir.actions.act_window',
+#                 #     'context': {
+#                 #         'default_company_id': self.company_id.id,
+#                 #         'default_production_id': self.id,
+#                 #     },
+#                 #     'domain': [('production_id', '=', self.id)],
+#                 # }
+#         else:
+#             raise UserError('该托盘编码已失效')
+#     else:
+#         raise UserError('托盘码不能为空')
+
+# 解除托盘绑定
+# def unbindtray(self):
+#     tray = self.env['sf.tray'].search([("production_id", "=", self.production_id.id)])
+#     if tray:
+#         tray.unclamp()
+#         self.tray_id = False
+
+# return {
+#     'name': _('New Maintenance Request'),
+#     'view_mode': 'form',
+#     'res_model': 'maintenance.request',
+#     'res_id':self.id,
+#     'type': 'ir.actions.act_window',
+#     'context': {
+#         'default_company_id': self.company_id.id,
+#         'default_production_id': self.id,
+#     },
+#     'domain': [('production_id', '=', self.id)],
+#     'target':'new'
+# }
+
+def recreateManufacturingOrWorkerOrder(self):
+    """
+    重新生成制造订单或者重新生成工单
+    """
+    if self.test_results == '报废':
+        values = self.env['mrp.production'].create_production1_values(self.production_id)
+        productions = self.env['mrp.production'].with_user(SUPERUSER_ID).sudo().with_company(
+            self.production_id.company_id).create(
+            values)
+        self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
+        self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
+        productions._create_workorder()
+        productions.filtered(lambda p: (not p.orderpoint_id and p.move_raw_ids) or \
+                                       (
+                                               p.move_dest_ids.procure_method != 'make_to_order' and
+                                               not p.move_raw_ids and not p.workorder_ids)).action_confirm()
+
+        for production in productions:
+            origin_production = production.move_dest_ids and production.move_dest_ids[
+                0].raw_material_production_id or False
+            orderpoint = production.orderpoint_id
+            if orderpoint and orderpoint.create_uid.id == SUPERUSER_ID and orderpoint.trigger == 'manual':
+                production.message_post(
+                    body=_('This production order has been created from Replenishment Report.'),
+                    message_type='comment',
+                    subtype_xmlid='mail.mt_note')
+            elif orderpoint:
+                production.message_post_with_view(
+                    'mail.message_origin_link',
+                    values={'self': production, 'origin': orderpoint},
+                    subtype_id=self.env.ref('mail.mt_note').id)
+            elif origin_production:
+                production.message_post_with_view(
+                    'mail.message_origin_link',
+                    values={'self': production, 'origin': origin_production},
+                    subtype_id=self.env.ref('mail.mt_note').id)
+    if self.test_results == '返工':
+        productions = self.production_id
+        # self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
+        # self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
+        productions._create_workorder2(self.processing_panel)
+    else:
+        self.results = '合格'
+
+
+def json_workorder_str1(self, k, production, route):
+    workorders_values_str = [0, '', {
+        'product_uom_id': production.product_uom_id.id,
+        'qty_producing': 0,
+        'operation_id': False,
+        'name': '%s(返工)' % route.route_workcenter_id.name,
+        'processing_panel': k,
+        'routing_type': route.routing_type,
+        'work_state': '' if not route.routing_type == '获取CNC加工程序' else '待发起',
+        'workcenter_id': self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids,
+                                                                           route.routing_type,
+                                                                           production.product_id),
+        'date_planned_start': False,
+        'date_planned_finished': False,
+        'duration_expected': 60,
+        'duration': 0,
+
+    }]
+    return workorders_values_str
+
+
+# 重写工单开始按钮方法
+def button_start(self):
+    if self.routing_type == '装夹预调' and self.production_id.move_raw_ids[0].move_line_ids[0].lot_id.name:
+        self.pro_code = self.production_id.move_raw_ids[0].move_line_ids[0].lot_id.name
+    # 外协出库单，从“正在等待”变为“就绪”状态
+    if self.is_subcontract is True:
+        picking_out = self.env['stock.picking'].search([('id', '=', self.picking_out_id.id)])
+        if picking_out.state == 'confirmed':
+            picking_out.write({'state': 'assigned'})
+    if self.state == 'waiting' or self.state == 'ready' or self.state == 'progress':
+        self.move_raw_ids = self.production_id.move_raw_ids
+        self.move_raw_ids[0].write({
+            'materiel_length': self.move_raw_ids[0].product_id.length,
+            'materiel_width': self.move_raw_ids[0].product_id.width,
+            'materiel_height': self.move_raw_ids[0].product_id.height
+        })
 
-    #  维修模块按钮
-    def button_maintenance_req(self):
         self.ensure_one()
-        return {
-            'name': _('New Maintenance Request'),
-            'view_mode': 'form',
-            'views': [(self.env.ref('mrp_maintenance.maintenance_request_view_form_inherit_mrp').id, 'form')],
-            'res_model': 'maintenance.request',
-            'type': 'ir.actions.act_window',
-            'context': {
-                'default_company_id': self.company_id.id,
-                'default_workorder_id': self.id,
-                'default_production_id': self.production_id.id,
-                'discard_on_footer_button': True,
-            },
-            'target': 'new',
-            'domain': [('workorder_id', '=', self.id)]
-        }
+        if any(not time.date_end for time in self.time_ids.filtered(lambda t: t.user_id.id == self.env.user.id)):
+            return True
+        # As button_start is automatically called in the new view
+        if self.state in ('done', 'cancel'):
+            return True
 
-    # tray_id = fields.Many2one('sf.tray', string="托盘信息", tracking=True)
-
-    # 扫码绑定托盘方法
-
-    # def gettray(self):
-    #     if self.tray_code != False:
-    #         values = self.env['sf.tray'].search([("code", "=", self.tray_code)])
-    #         if values:
-    #             if values.state == "占用":
-    #                 raise UserError('该托盘已占用')
-    #             if values.state == "报损":
-    #                 raise UserError('该托盘已损坏')
-    #             else:
-    #                 values.update({
-    #                     'workorder_id': self,
-    #                     'production_id': self.production_id,
-    #                     'state': '占用',
-    #                 })
-    #                 self.work_state = "已绑定"
-    #                 orders = self.env['mrp.workorder'].search([('production_id', '=', self.production_id.id)])
-    #                 for a in orders:
-    #                     a.tray_id = values
-    #         else:
-    #             raise UserError('该托盘编码已失效')
-    #     else:
-    #         raise UserError('托盘码不能为空')
-
-    # 验证坯料序列号是否正确
-    def pro_code_is_ok(self, barcode):
-        if barcode is not False:
-            if barcode != self.pro_code:
-                raise UserError('坯料序列号错误')
-                return False
-            else:
-                return True
-
-    pro_code = fields.Char(string='坯料序列号')
-
-    pro_code_ok = fields.Boolean(default=False)
-
-    # 托盘扫码绑定
-    # def gettray_auto(self, barcode):
-    #     if barcode != False:
-    #         values = self.env['sf.tray'].search([("code", "=", barcode)])
-    #
-    #         if values:
-    #             if values.state == "占用":
-    #                 raise UserError('该托盘已占用')
-    #             if values.state == "报损":
-    #                 raise UserError('该托盘已损坏')
-    #             else:
-    #                 values.update({
-    #                     'workorder_id': self,
-    #                     'production_id': self.production_id,
-    #                     'state': '占用',
-    #                 })
-    #                 self.work_state = "已绑定"
-    #                 orders = self.env['mrp.workorder'].search([('production_id', '=', self.production_id.id)])
-    #                 for a in orders:
-    #                     a.tray_id = values
-    #
-    #                 return values
-    #
-    #                 # return {
-    #                 #     'name': _('New Maintenance Request'),
-    #                 #     'view_mode': 'form',
-    #                 #     'res_model': 'maintenance.request',
-    #                 #     'type': 'ir.actions.act_window',
-    #                 #     'context': {
-    #                 #         'default_company_id': self.company_id.id,
-    #                 #         'default_production_id': self.id,
-    #                 #     },
-    #                 #     'domain': [('production_id', '=', self.id)],
-    #                 # }
-    #         else:
-    #             raise UserError('该托盘编码已失效')
-    #     else:
-    #         raise UserError('托盘码不能为空')
-
-    # 解除托盘绑定
-    # def unbindtray(self):
-    #     tray = self.env['sf.tray'].search([("production_id", "=", self.production_id.id)])
-    #     if tray:
-    #         tray.unclamp()
-    #         self.tray_id = False
-
-    # return {
-    #     'name': _('New Maintenance Request'),
-    #     'view_mode': 'form',
-    #     'res_model': 'maintenance.request',
-    #     'res_id':self.id,
-    #     'type': 'ir.actions.act_window',
-    #     'context': {
-    #         'default_company_id': self.company_id.id,
-    #         'default_production_id': self.id,
-    #     },
-    #     'domain': [('production_id', '=', self.id)],
-    #     'target':'new'
-    # }
-
-    def recreateManufacturingOrWorkerOrder(self):
-        """
-        重新生成制造订单或者重新生成工单
-        """
-        if self.test_results == '报废':
-            values = self.env['mrp.production'].create_production1_values(self.production_id)
-            productions = self.env['mrp.production'].with_user(SUPERUSER_ID).sudo().with_company(
-                self.production_id.company_id).create(
-                values)
-            self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
-            self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
-            productions._create_workorder()
-            productions.filtered(lambda p: (not p.orderpoint_id and p.move_raw_ids) or \
-                                           (
-                                                   p.move_dest_ids.procure_method != 'make_to_order' and
-                                                   not p.move_raw_ids and not p.workorder_ids)).action_confirm()
-
-            for production in productions:
-                origin_production = production.move_dest_ids and production.move_dest_ids[
-                    0].raw_material_production_id or False
-                orderpoint = production.orderpoint_id
-                if orderpoint and orderpoint.create_uid.id == SUPERUSER_ID and orderpoint.trigger == 'manual':
-                    production.message_post(
-                        body=_('This production order has been created from Replenishment Report.'),
-                        message_type='comment',
-                        subtype_xmlid='mail.mt_note')
-                elif orderpoint:
-                    production.message_post_with_view(
-                        'mail.message_origin_link',
-                        values={'self': production, 'origin': orderpoint},
-                        subtype_id=self.env.ref('mail.mt_note').id)
-                elif origin_production:
-                    production.message_post_with_view(
-                        'mail.message_origin_link',
-                        values={'self': production, 'origin': origin_production},
-                        subtype_id=self.env.ref('mail.mt_note').id)
-        if self.test_results == '返工':
-            productions = self.production_id
-            # self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
-            # self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
-            productions._create_workorder2(self.processing_panel)
+        if self.product_tracking == 'serial':
+            self.qty_producing = 1.0
         else:
-            self.results = '合格'
+            self.qty_producing = self.qty_remaining
 
-    def json_workorder_str1(self, k, production, route):
-        workorders_values_str = [0, '', {
-            'product_uom_id': production.product_uom_id.id,
-            'qty_producing': 0,
-            'operation_id': False,
-            'name': '%s(返工)' % route.route_workcenter_id.name,
-            'processing_panel': k,
-            'routing_type': route.routing_type,
-            'work_state': '' if not route.routing_type == '获取CNC加工程序' else '待发起',
-            'workcenter_id': self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids,
-                                                                               route.routing_type,
-                                                                               production.product_id),
-            'date_planned_start': False,
-            'date_planned_finished': False,
-            'duration_expected': 60,
-            'duration': 0,
-
-        }]
-        return workorders_values_str
-
-    # 重写工单开始按钮方法
-    def button_start(self):
-        if self.routing_type == '装夹预调' and self.production_id.move_raw_ids[0].move_line_ids[0].lot_id.name:
-            self.pro_code = self.production_id.move_raw_ids[0].move_line_ids[0].lot_id.name
-        # 外协出库单，从“正在等待”变为“就绪”状态
-        if self.is_subcontract is True:
-            picking_out = self.env['stock.picking'].search([('id', '=', self.picking_out_id.id)])
-            if picking_out.state == 'confirmed':
-                picking_out.write({'state': 'assigned'})
-        if self.state == 'waiting' or self.state == 'ready' or self.state == 'progress':
-            self.move_raw_ids = self.production_id.move_raw_ids
-            self.move_raw_ids[0].write({
-                'materiel_length': self.move_raw_ids[0].product_id.length,
-                'materiel_width': self.move_raw_ids[0].product_id.width,
-                'materiel_height': self.move_raw_ids[0].product_id.height
+        self.env['mrp.workcenter.productivity'].create(
+            self._prepare_timeline_vals(self.duration, datetime.now())
+        )
+        if self.production_id.state != 'progress':
+            self.production_id.write({
+                'date_start': datetime.now(),
             })
-
-            self.ensure_one()
-            if any(not time.date_end for time in self.time_ids.filtered(lambda t: t.user_id.id == self.env.user.id)):
-                return True
-            # As button_start is automatically called in the new view
-            if self.state in ('done', 'cancel'):
-                return True
-
-            if self.product_tracking == 'serial':
-                self.qty_producing = 1.0
-            else:
-                self.qty_producing = self.qty_remaining
-
-            self.env['mrp.workcenter.productivity'].create(
-                self._prepare_timeline_vals(self.duration, datetime.now())
-            )
-            if self.production_id.state != 'progress':
-                self.production_id.write({
-                    'date_start': datetime.now(),
-                })
-            if self.state == 'progress':
-                return True
-            start_date = datetime.now()
-            vals = {
-                'state': 'progress',
-                'date_start': start_date,
-            }
-            if not self.leave_id:
-                leave = self.env['resource.calendar.leaves'].create({
-                    'name': self.display_name,
-                    'calendar_id': self.workcenter_id.resource_calendar_id.id,
-                    'date_from': start_date,
-                    'date_to': start_date + relativedelta(minutes=self.duration_expected),
-                    'resource_id': self.workcenter_id.resource_id.id,
-                    'time_type': 'other'
-                })
-                vals['leave_id'] = leave.id
-                return self.write(vals)
-            else:
-                if self.date_planned_start > start_date:
-                    vals['date_planned_start'] = start_date
-                if self.date_planned_finished and self.date_planned_finished < start_date:
-                    vals['date_planned_finished'] = start_date
-                return self.write(vals)
+        if self.state == 'progress':
+            return True
+        start_date = datetime.now()
+        vals = {
+            'state': 'progress',
+            'date_start': start_date,
+        }
+        if not self.leave_id:
+            leave = self.env['resource.calendar.leaves'].create({
+                'name': self.display_name,
+                'calendar_id': self.workcenter_id.resource_calendar_id.id,
+                'date_from': start_date,
+                'date_to': start_date + relativedelta(minutes=self.duration_expected),
+                'resource_id': self.workcenter_id.resource_id.id,
+                'time_type': 'other'
+            })
+            vals['leave_id'] = leave.id
+            return self.write(vals)
         else:
-            raise UserError(_('请先完成上一步工单'))
+            if self.date_planned_start > start_date:
+                vals['date_planned_start'] = start_date
+            if self.date_planned_finished and self.date_planned_finished < start_date:
+                vals['date_planned_finished'] = start_date
+            return self.write(vals)
+    else:
+        raise UserError(_('请先完成上一步工单'))
 
-    def button_finish(self):
-        if self.routing_type == '装夹预调':
-            if not self.material_center_point and self.X_deviation_angle > 0:
-                raise UserError("请对前置三元检测定位参数进行计算定位")
-            if not self.rfid_code:
-                raise UserError("请扫RFID码进行绑定")
-        if self.picking_out_id:
-            picking_out = self.env['stock.picking'].search([('id', '=', self.picking_out_id.id)])
-            if picking_out.workorder_out_id:
-                order_line_ids = []
-                for item in picking_out.workorder_out_id:
-                    server_product = self.env['product.template'].search(
-                        [('server_product_process_parameters_id', '=', item.surface_technics_parameters_id.id),
-                         ('detailed_type', '=', 'service')])
-                    if server_product:
-                        order_line_ids.append((0, 0, {
-                            'product_id': server_product.product_variant_id.id,
-                            'product_qty': 1,
-                            'product_uom': server_product.uom_id.id
-                        }))
-                    else:
-                        raise UserError(
-                            '请先在产品中配置表面工艺为%s相关的外协服务产品' % item.surface_technics_parameters_id.name)
-                self.env['purchase.order'].create({
-                    'partner_id': server_product.seller_ids.partner_id.id,
-                    'state': 'draft',
-                    'order_line': order_line_ids,
-                })
-        super().button_finish()
-        is_production_id = True
+
+def button_finish(self):
+    if self.routing_type == '装夹预调':
+        if not self.material_center_point and self.X_deviation_angle > 0:
+            raise UserError("请对前置三元检测定位参数进行计算定位")
+        if not self.rfid_code:
+            raise UserError("请扫RFID码进行绑定")
+    if self.picking_out_id:
+        picking_out = self.env['stock.picking'].search([('id', '=', self.picking_out_id.id)])
+        if picking_out.workorder_out_id:
+            order_line_ids = []
+            for item in picking_out.workorder_out_id:
+                server_product = self.env['product.template'].search(
+                    [('server_product_process_parameters_id', '=', item.surface_technics_parameters_id.id),
+                     ('detailed_type', '=', 'service')])
+                if server_product:
+                    order_line_ids.append((0, 0, {
+                        'product_id': server_product.product_variant_id.id,
+                        'product_qty': 1,
+                        'product_uom': server_product.uom_id.id
+                    }))
+                else:
+                    raise UserError(
+                        '请先在产品中配置表面工艺为%s相关的外协服务产品' % item.surface_technics_parameters_id.name)
+            self.env['purchase.order'].create({
+                'partner_id': server_product.seller_ids.partner_id.id,
+                'state': 'draft',
+                'order_line': order_line_ids,
+            })
+    super().button_finish()
+    is_production_id = True
+    for workorder in self.production_id.workorder_ids:
+        if workorder.state != 'done':
+            is_production_id = False
+    if is_production_id == True and self.name == '解除装夹':
         for workorder in self.production_id.workorder_ids:
-            if workorder.state != 'done':
-                is_production_id = False
-        if is_production_id == True and self.name == '解除装夹':
-            for workorder in self.production_id.workorder_ids:
-                workorder.rfid_code_old = workorder.rfid_code
-                workorder.rfid_code = None
-            for move_raw_id in self.production_id.move_raw_ids:
-                move_raw_id.quantity_done = move_raw_id.product_uom_qty
-            self.production_id.button_mark_done1()
-            # self.production_id.state = 'done'
+            workorder.rfid_code_old = workorder.rfid_code
+            workorder.rfid_code = None
+        for move_raw_id in self.production_id.move_raw_ids:
+            move_raw_id.quantity_done = move_raw_id.product_uom_qty
+        self.production_id.button_mark_done1()
+        # self.production_id.state = 'done'
 
-    # 将FTP的检测报告文件下载到临时目录
-    def download_reportfile_tmp(self, workorder, reportpath):
-        logging.info('reportpath:%s' % reportpath)
-        production_no_ftp = reportpath.split('/')
-        production_no = workorder.production_id.name.replace('/', '_')
-        # ftp地址
-        remotepath = os.path.join('/NC', production_no_ftp[1], 'detection')
-        logging.info('ftp地址:%s' % remotepath)
-        if reportpath.find(production_no) != -1:
-            # 服务器内临时地址
-            serverdir = os.path.join('/tmp', production_no_ftp[1], 'detection')
-            ftp_resconfig = self.env['res.config.settings'].get_values()
-            ftp = FtpController(str(ftp_resconfig['ftp_host']), int(ftp_resconfig['ftp_port']),
-                                ftp_resconfig['ftp_user'],
-                                ftp_resconfig['ftp_password'])
-            download_state = ftp.download_reportfile_tree(remotepath, serverdir, reportpath)
-            logging.info('download_state:%s' % download_state)
-        else:
-            download_state = 2
-        return download_state
 
-    # 根据中控系统提供的检测文件地址去ftp里对应的制造订单里获取
-    def get_detection_file(self, workorder, reportPath):
-        if reportPath.startswith('/'):
-            reportPath = reportPath[1:]
-        serverdir = os.path.join('/tmp', reportPath)
-        logging.info('get_detection_file-serverdir:%s' % serverdir)
-        serverdir_prefix = os.path.dirname(serverdir)
-        for root, dirs, files in os.walk(serverdir_prefix):
-            for filename in files:
-                if filename == os.path.basename(reportPath):
-                    report_file_path = os.path.join(root, filename)
-                    logging.info('get_detection_file-report_file_path:%s' % report_file_path)
-                    workorder.detection_report = base64.b64encode(open(report_file_path, 'rb').read())
-                    return True
+# 将FTP的检测报告文件下载到临时目录
+def download_reportfile_tmp(self, workorder, reportpath):
+    logging.info('reportpath:%s' % reportpath)
+    production_no_ftp = reportpath.split('/')
+    production_no = workorder.production_id.name.replace('/', '_')
+    # ftp地址
+    remotepath = os.path.join('/NC', production_no_ftp[1], 'detection')
+    logging.info('ftp地址:%s' % remotepath)
+    if reportpath.find(production_no) != -1:
+        # 服务器内临时地址
+        serverdir = os.path.join('/tmp', production_no_ftp[1], 'detection')
+        ftp_resconfig = self.env['res.config.settings'].get_values()
+        ftp = FtpController(str(ftp_resconfig['ftp_host']), int(ftp_resconfig['ftp_port']),
+                            ftp_resconfig['ftp_user'],
+                            ftp_resconfig['ftp_password'])
+        download_state = ftp.download_reportfile_tree(remotepath, serverdir, reportpath)
+        logging.info('download_state:%s' % download_state)
+    else:
+        download_state = 2
+    return download_state
+
+
+# 根据中控系统提供的检测文件地址去ftp里对应的制造订单里获取
+def get_detection_file(self, workorder, reportPath):
+    if reportPath.startswith('/'):
+        reportPath = reportPath[1:]
+    serverdir = os.path.join('/tmp', reportPath)
+    logging.info('get_detection_file-serverdir:%s' % serverdir)
+    serverdir_prefix = os.path.dirname(serverdir)
+    for root, dirs, files in os.walk(serverdir_prefix):
+        for filename in files:
+            if filename == os.path.basename(reportPath):
+                report_file_path = os.path.join(root, filename)
+                logging.info('get_detection_file-report_file_path:%s' % report_file_path)
+                workorder.detection_report = base64.b64encode(open(report_file_path, 'rb').read())
+                return True
 
 
 class CNCprocessing(models.Model):
@@ -1084,6 +1100,8 @@ class WorkPieceDelivery(models.Model):
     feeder_station_destination_id = fields.Many2one('sf.agv.site', '目的接驳站')
     task_delivery_time = fields.Datetime('任务下发时间')
     task_completion_time = fields.Datetime('任务完成时间')
+    type = fields.Selection(
+        [('上产线', '上产线'), ('下产线', '下产线'), ('运送空料架', '运送空料架')], string='类型')
     delivery_duration = fields.Float('配送时长', compute='_compute_delivery_duration')
     status = fields.Selection(
         [('待下发', '待下发'), ('待配送', '待配送'), ('已配送', '已配送')], string='状态',
@@ -1124,6 +1142,9 @@ class WorkPieceDelivery(models.Model):
 
     # 配送至avg小车
     def _delivery_avg(self):
+        agv_site = self.env['sf.agv.site'].search([])
+        if agv_site:
+            agv_site.update_site_state()
         config = self.env['res.config.settings'].get_values()
         positionCode_Arr = []
         if self.feeder_station_start_id:
@@ -1143,7 +1164,7 @@ class WorkPieceDelivery(models.Model):
                'podDir': '', 'materialLot': '', 'priority': '', 'taskCode': '', 'agvCode': '', 'materialLot': '',
                'data': ''}
         try:
-            config['agv_rcs_url'] = 'http://172.16.10.114:8182/rcms/services/rest/hikRpcService/genAgvSchedulingTask'
+            # config['agv_rcs_url'] = 'http://172.16.10.114:8182/rcms/services/rest/hikRpcService/genAgvSchedulingTask'
             logging.info('AGV请求路径:%s' % config['agv_rcs_url'])
             logging.info('AGV-json:%s' % res)
             headers = {'Content-Type': 'application/json'}

sf_manufacturing/models/product_template.py

@@ -7,8 +7,8 @@ import os
 from odoo import models, fields, api, _
 from odoo.exceptions import ValidationError
 from odoo.modules import get_resource_path
-# from OCC.Extend.DataExchange import read_step_file
-# from OCC.Extend.DataExchange import write_stl_file
+from OCC.Extend.DataExchange import read_step_file
+from OCC.Extend.DataExchange import write_stl_file
 
 
 class ResProductMo(models.Model):

sf_manufacturing/wizard/workpiece_delivery_views.xml

@@ -5,18 +5,11 @@
         <field name="model">sf.workpiece.delivery.wizard</field>
         <field name="arch" type="xml">
             <form>
-                <group>
                     <field name="delivery_id" invisible="True"/>
                     <field name="workorder_id" invisible="True"/>
-                    <field name="route_id" required="1" options="{'no_create': True}"/>
-                </group>
-                <div>
-                    <field name="is_ok"/>
-                    确认上述信息正确无误.
-                </div>
+                <div>是否确定配送?</div>
                 <footer>
-                    <button string="确认配送" name="confirm" type="object" class="oe_highlight"
-                            attrs="{'invisible':[('is_ok','=',False)]}"/>
+                    <button string="确认" name="confirm" type="object" class="oe_highlight"/>
                     <button string="取消" class="btn btn-secondary" special="cancel"/>
                 </footer>
             </form>

sf_manufacturing/wizard/workpiece_delivery_wizard.py

@@ -11,8 +11,6 @@ class WorkpieceDeliveryWizard(models.TransientModel):
 
     delivery_id = fields.Many2one('sf.workpiece.delivery', string='配送')
     workorder_id = fields.Many2one('mrp.workorder', string='工单')
-    route_id = fields.Many2one('sf.agv.task.route', '任务路线')
-    is_ok = fields.Boolean('确认上述信息正确无误.')
 
     def confirm(self):
         if self.workorder_id:

sf_mrs_connect/models/res_config_setting.py

@@ -17,6 +17,7 @@ class ResConfigSettings(models.TransientModel):
                               default='http://172.16.10.114:8182/rcms/services/rest/hikRpcService/genAgvSchedulingTask')
     center_control_url = fields.Char(string='中控访问地址',
                                      default='http://172.16.21.50:8001')
+    center_control_Authorization = fields.Char(string='中控访问认证')
     wbcode = fields.Char('地码')
     agv_code = fields.Char(string='agv编号')
     task_type_no = fields.Char('任务单类型编号')
@@ -102,6 +103,7 @@ class ResConfigSettings(models.TransientModel):
         wbcode = config.get_param('wbcode', default='')
         agv_code = config.get_param('agv_code', default='')
         center_control_url = config.get_param('center_control_url', default='')
+        center_control_Authorization = config.get_param('center_control_Authorization', default='')
         ftp_host = config.get_param('ftp_host', default='')
         ftp_port = config.get_param('ftp_port', default='')
         ftp_user = config.get_param('ftp_user', default='')
@@ -115,6 +117,7 @@ class ResConfigSettings(models.TransientModel):
             wbcode=wbcode,
             agv_code=agv_code,
             center_control_url=center_control_url,
+            center_control_Authorization=center_control_Authorization,
             ftp_host=ftp_host,
             ftp_port=ftp_port,
             ftp_user=ftp_user,
@@ -132,6 +135,7 @@ class ResConfigSettings(models.TransientModel):
         ir_config.set_param("wbcode", self.wbcode or "")
         ir_config.set_param("agv_code", self.agv_code or "")
         ir_config.set_param("center_control_url", self.center_control_url or "")
+        ir_config.set_param("center_control_Authorization", self.center_control_Authorization or "")
         ir_config.set_param("ftp_host", self.ftp_host or "")
         ir_config.set_param("ftp_port", self.ftp_port or "")
         ir_config.set_param("ftp_user", self.ftp_user or "")

sf_mrs_connect/views/res_config_settings_views.xml

@@ -106,6 +106,10 @@
                                         <label for="center_control_url" string="访问地址"/>
                                         <field name="center_control_url"/>
                                     </div>
+                                     <div class="text-muted">
+                                        <label for="center_control_Authorization" string="身份认证"/>
+                                        <field name="center_control_Authorization"/>
+                                    </div>
                                 </div>
                             </div>
                         </div>

sf_sale/models/quick_easy_order.py

@@ -8,8 +8,8 @@ from datetime import datetime
 import requests
 from odoo import http
 from odoo.http import request
-# from OCC.Extend.DataExchange import read_step_file
-# from OCC.Extend.DataExchange import write_stl_file
+from OCC.Extend.DataExchange import read_step_file
+from OCC.Extend.DataExchange import write_stl_file
 from odoo import models, fields, api
 from odoo.modules import get_resource_path
 from odoo.exceptions import ValidationError, UserError

sf_sale/models/quick_easy_order_old.py

@@ -6,8 +6,8 @@ import os
 from datetime import datetime
 from stl import mesh
 # from OCC.Core.GProp import GProp_GProps
-# from OCC.Extend.DataExchange import read_step_file
-# from OCC.Extend.DataExchange import write_stl_file
+from OCC.Extend.DataExchange import read_step_file
+from OCC.Extend.DataExchange import write_stl_file
 from odoo.addons.sf_base.commons.common import Common
 from odoo import models, fields, api
 from odoo.modules import get_resource_path

sf_tool_management/models/maintenance_equipment.py

@@ -43,12 +43,10 @@ class SfMaintenanceEquipment(models.Model):
 
     # ==========机床当前刀库实时信息接口==========
     def register_equipment_tool(self):
-        # sf_sync_config = self.env['res.config.settings'].get_values()
-        # token = sf_sync_config['token']
-        # sf_secret_key = sf_sync_config['sf_secret_key']
-        # headers = Common.get_headers(self, token, sf_secret_key)
-        headers = {'Authorization': 'Ba F2CF5DCC-1A00-4234-9E95-65603F70CC8A'}
-        crea_url = "https://x24467i973.zicp.fun/AutoDeviceApi/GetToolInfos"
+        config = self.env['res.config.settings'].get_values()
+        # token = sf_sync_config['token'Ba F2CF5DCC-1A00-4234-9E95-65603F70CC8A]
+        headers = {'Authorization': config['center_control_Authorization']}
+        crea_url = config['center_control_url'] + "/AutoDeviceApi/GetToolInfos"
         params = {"DeviceId": self.name}
         r = requests.get(crea_url, params=params, headers=headers)
         ret = r.json()