更改制造模块名

sf_manufacturing/models/mrp_workorder.py

@@ -0,0 +1,325 @@
+from odoo import api, fields, models, SUPERUSER_ID, _
+
+
+class ResMrpWorkOrder(models.Model):
+    _inherit = 'mrp.workorder'
+    _order = 'sequence'
+
+    workcenter_id = fields.Many2one('mrp.workcenter', required=False)
+    processing_panel = fields.Char('加工面')
+    sequence = fields.Integer(string='工序')
+    routing_type = fields.Selection([
+        ('获取CNC加工程序', '获取CNC加工程序'),
+        ('装夹', '装夹'),
+        ('前置三元定位检测', '前置三元定位检测'),
+        ('CNC加工', 'CNC加工'),
+        ('后置三元质量检测', '后置三元质量检测'),
+        ('解除装夹', '解除装夹'),
+    ], string="工序类型")
+    material_center_point = fields.Char(string='配料中心点')
+    X1_axis = fields.Float(string='Lx1', default=0)
+    Y1_axis = fields.Float(string='Ly1', default=0)
+    Z1_axis = fields.Float(string='Lz1', default=0)
+    X2_axis = fields.Float(string='Lx2', default=0)
+    Y2_axis = fields.Float(string='Ly2', default=0)
+    Z2_axis = fields.Float(string='Lz2', default=0)
+    X3_axis = fields.Float(string='Fx3', default=0)
+    Y3_axis = fields.Float(string='Fy3', default=0)
+    Z3_axis = fields.Float(string='Fz3', default=0)
+    X4_axis = fields.Float(string='Fx4', default=0)
+    Y4_axis = fields.Float(string='Fy4', default=0)
+    Z4_axis = fields.Float(string='Fz4', default=0)
+    X5_axis = fields.Float(string='Rx5', default=0)
+    Y5_axis = fields.Float(string='Ry5', default=0)
+    Z5_axis = fields.Float(string='Rz5', default=0)
+    X6_axis = fields.Float(string='Rx6', default=0)
+    Y6_axis = fields.Float(string='Ry6', default=0)
+    Z6_axis = fields.Float(string='Rz6', default=0)
+    X7_axis = fields.Float(string='Bx7', default=0)
+    Y7_axis = fields.Float(string='By7', default=0)
+    Z7_axis = fields.Float(string='Bz7', default=0)
+    X8_axis = fields.Float(string='Bx8', default=0)
+    Y8_axis = fields.Float(string='By8', default=0)
+    Z8_axis = fields.Float(string='Bz8', default=0)
+    X9_axis = fields.Float(string='Uz9', default=0)
+    Y9_axis = fields.Float(string='Uz9', default=0)
+    Z9_axis = fields.Float(string='Uz9', default=0)
+    X10_axis = fields.Float(string='Uz10', default=0)
+    Y10_axis = fields.Float(string='Uz10', default=0)
+    Z10_axis = fields.Float(string='Uz10', default=0)
+    X_deviation_angle = fields.Integer(string="X轴偏差度", default=0)
+    test_results = fields.Selection([("合格", "合格"), ("返工", "返工"), ("报废", "报废")], string="检测结果")
+    cnc_ids = fields.One2many("sf.cnc.processing", 'workorder_id', string="CNC加工")
+    tray_code = fields.Char(string="托盘")
+
+    # 计算配料中心点和与x轴倾斜度方法
+    def getcenter(self):
+        x1 = self.X1_axis
+        x2 = self.X2_axis
+        x3 = self.X3_axis
+        x4 = self.X4_axis
+        x5 = self.X5_axis
+        x6 = self.X6_axis
+        x7 = self.X7_axis
+        x8 = self.X8_axis
+        y1 = self.Y1_axis
+        y2 = self.Y2_axis
+        y3 = self.Y3_axis
+        y4 = self.Y4_axis
+        y5 = self.Y5_axis
+        y6 = self.Y6_axis
+        y7 = self.Y7_axis
+        y8 = self.Y8_axis
+        z1 = self.Z9_axis
+        x0 = ((x3 - x4) * (x2 * y1 - x1 * y2) - (x1 - x2) * (x4 * y3 - x3 * y4)) / (
+                (x3 - x4) * (y1 - y2) - (x1 - x2) * (y3 - y4))
+        y0 = ((y3 - y4) * (y2 * x1 - y1 * x2) - (y1 - y2) * (y4 * x3 - y3 * x4)) / (
+                (y3 - y4) * (x1 - x2) - (y1 - y2) * (x3 - x4))
+        x1 = ((x7 - x8) * (x6 * y5 - x5 * y6) - (x5 - x6) * (x8 * y7 - x7 * y8)) / (
+                (x7 - x8) * (y5 - y6) - (x5 - x6) * (y7 - y8));
+        y1 = ((y7 - y8) * (y6 * x5 - y5 * x6) - (y5 - y6) * (y8 * x7 - y7 * x8)) / (
+                (y7 - y8) * (x5 - x6) - (y5 - y6) * (x7 - x8))
+        x = (x0 + x1) / 2
+        y = (y0 + y1) / 2
+        z = z1 / 2
+
+        jd = math.atan2((x5 - x6), (y5 - y6))
+        jdz = jd * 180 / math.pi
+        print("(%.2f,%.2f)" % (x, y))
+        self.material_center_point = ("(%.2f,%.2f,%.2f)" % (x, y, z))
+        self.X_deviation_angle = jdz
+
+    def json_workorder_str(self, k, production, route):
+        workorders_values_str = [0, '', {
+            'product_uom_id': production.product_uom_id.id,
+            'qty_producing': 0,
+            'operation_id': False,
+            'name': route.route_workcenter_id.name,
+            'processing_panel': k,
+            'routing_type': route.routing_type,
+            'workcenter_id': self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids),
+            'date_planned_start': False,
+            'date_planned_finished': False,
+            'duration_expected': 60,
+            'duration': 0
+        }]
+        return workorders_values_str
+
+    #  工作中心看板按钮
+    def button_maintenance_req(self):
+        self.ensure_one()
+        return {
+            'name': _('New Maintenance Request'),
+            'view_mode': 'form',
+            'views': [(self.env.ref('mrp_maintenance.maintenance_request_view_form_inherit_mrp').id, 'form')],
+            'res_model': 'maintenance.request',
+            'type': 'ir.actions.act_window',
+            'context': {
+                'default_company_id': self.company_id.id,
+                'default_workorder_id': self.id,
+                'default_production_id': self.production_id.id,
+                'discard_on_footer_button': True,
+            },
+            'target': 'new',
+            'domain': [('workorder_id', '=', self.id)]
+        }
+
+    # 扫码绑定托盘方法
+    def gettray(self):
+        if self.tray_code != False:
+            values = self.env['sf.tray'].search([("code", "=", self.tray_code)])
+            if values:
+                if values.state == "占用":
+                    raise ValidationError('该托盘已占用')
+                if values.state == "报损":
+                    raise ValidationError('该托盘已损坏')
+                else:
+                    values.update({
+                        'workorder_id': self,
+                        'production_id': self.production_id,
+                        'state': '占用',
+                    })
+            else:
+                raise ValidationError('该托盘编码已失效')
+        else:
+            return ""
+
+    # 解除托盘绑定
+    def unbindtray(self):
+        tray = self.env['sf.tray'].search([("production_id", "=", self.production_id.id)])
+        if tray:
+            tray.unclamp()
+
+        return ""
+
+    def recreateManufacturingOrWorkerOrder(self):
+        """
+        重新生成制造订单或者重新生成工单
+        """
+        if self.test_results == '报废':
+            values = self.env['mrp.production'].create_production1_values(self.production_id)
+            productions = self.env['mrp.production'].with_user(SUPERUSER_ID).sudo().with_company(
+                self.production_id.company_id).create(
+                values)
+            self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
+            self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
+            productions._create_workorder()
+            productions.filtered(lambda p: (not p.orderpoint_id and p.move_raw_ids) or \
+                                           (
+                                                   p.move_dest_ids.procure_method != 'make_to_order' and not p.move_raw_ids and not p.workorder_ids)).action_confirm()
+
+            for production in productions:
+                origin_production = production.move_dest_ids and production.move_dest_ids[
+                    0].raw_material_production_id or False
+                orderpoint = production.orderpoint_id
+                if orderpoint and orderpoint.create_uid.id == SUPERUSER_ID and orderpoint.trigger == 'manual':
+                    production.message_post(
+                        body=_('This production order has been created from Replenishment Report.'),
+                        message_type='comment',
+                        subtype_xmlid='mail.mt_note')
+                elif orderpoint:
+                    production.message_post_with_view(
+                        'mail.message_origin_link',
+                        values={'self': production, 'origin': orderpoint},
+                        subtype_id=self.env.ref('mail.mt_note').id)
+                elif origin_production:
+                    production.message_post_with_view(
+                        'mail.message_origin_link',
+                        values={'self': production, 'origin': origin_production},
+                        subtype_id=self.env.ref('mail.mt_note').id)
+        if self.test_results == '返工':
+            productions = self.production_id
+            self.env['stock.move'].sudo().create(productions._get_moves_raw_values())
+            self.env['stock.move'].sudo().create(productions._get_moves_finished_values())
+            productions._create_workorder2(self.processing_panel)
+        else:
+            return True
+
+    # cnc程序获取
+    def fetchCNC(self):
+        res = [{'model_code': self.product_id.barcode, 'production_no': self.production_id.name,
+                'machine_tool_code': self.workcenter_id.machine_tool_id.code,
+                'material_code': self.env['mrs.production.materials'].search(
+                    [('id', '=', self.product_id.materials_id.id)]).materials_no,
+                'material_type_code': self.env['mrs.materials.model'].search(
+                    [('id', '=', self.product_id.materials_type_id.id)]).materials_no,
+                'embryo_long': self.product_id.bom_ids.bom_line_ids.product_id.long,
+                'embryo_height': self.product_id.bom_ids.bom_line_ids.product_id.height,
+                'embryo_width': self.product_id.bom_ids.bom_line_ids.product_id.width
+                # 'factory_code': self.env.user.company_id.partner_id.
+                }]
+        configsettings = self.env['res.config.settings'].get_values()
+        config_header = Common.get_headers(self, configsettings['token'], configsettings['mrs_secret_key'])
+        url = '/api/intelligent_programming/create'
+        config_url = configsettings['mrs_url'] + url
+        res_str = json.dumps(res)
+        ret = requests.post(config_url, json={"result": res_str}, data=None, headers=config_header)
+        ret = ret.json()
+        result = json.loads(ret['result'])
+        if result['status'] == 1:
+            return self.write({'state': 'progress'})
+
+    def json_workorder_str1(self, k, production, route):
+        workorders_values_str = [0, '', {
+            'product_uom_id': production.product_uom_id.id,
+            'qty_producing': 0,
+            'operation_id': False,
+            'name': route.route_workcenter_id.name,
+            'processing_panel': k,
+            'routing_type': route.routing_type,
+            'workcenter_id': self.env['mrp.routing.workcenter'].get_workcenter(route.workcenter_ids.ids),
+            'date_planned_start': False,
+            'date_planned_finished': False,
+            'duration_expected': 60,
+            'duration': 0
+        }]
+        return workorders_values_str
+
+    # 重写工单开始按钮方法
+    def button_start(self):
+        if self.state == 'waiting':
+            self.ensure_one()
+            if any(not time.date_end for time in self.time_ids.filtered(lambda t: t.user_id.id == self.env.user.id)):
+                return True
+            # As button_start is automatically called in the new view
+            if self.state in ('done', 'cancel'):
+                return True
+
+            if self.product_tracking == 'serial':
+                self.qty_producing = 1.0
+            else:
+                self.qty_producing = self.qty_remaining
+
+            self.env['mrp.workcenter.productivity'].create(
+                self._prepare_timeline_vals(self.duration, datetime.now())
+            )
+            if self.production_id.state != 'progress':
+                self.production_id.write({
+                    'date_start': datetime.now(),
+                })
+            if self.state == 'progress':
+                return True
+            start_date = datetime.now()
+            vals = {
+                'state': 'progress',
+                'date_start': start_date,
+            }
+            if not self.leave_id:
+                leave = self.env['resource.calendar.leaves'].create({
+                    'name': self.display_name,
+                    'calendar_id': self.workcenter_id.resource_calendar_id.id,
+                    'date_from': start_date,
+                    'date_to': start_date + relativedelta(minutes=self.duration_expected),
+                    'resource_id': self.workcenter_id.resource_id.id,
+                    'time_type': 'other'
+                })
+                vals['leave_id'] = leave.id
+                return self.write(vals)
+            else:
+                if self.date_planned_start > start_date:
+                    vals['date_planned_start'] = start_date
+                if self.date_planned_finished and self.date_planned_finished < start_date:
+                    vals['date_planned_finished'] = start_date
+                return self.write(vals)
+        else:
+            raise ValidationError(_('请先完成上一步工单'))
+
+
+class CNCprocessing(models.Model):
+    _name = 'sf.cnc.processing'
+    _description = "CNC加工"
+
+    cnc_id = fields.Many2one('ir.attachment')
+    FNo = fields.Char(string="序号")
+    FPGName = fields.Char(string="程序名")
+    FKnifeName = fields.Char(string="刀具名称")
+    FDNo = fields.Char(string="刀号")
+    FWorkType = fields.Char(string="加工类型")
+    FXY = fields.Char(string="余量_X/Y")
+    FZ = fields.Char(string="余量_Z")
+    FJGSD = fields.Char(string="加工深度(Z)")
+    FSCCD = fields.Char(string="刀具伸出长度")
+    FDJSpec = fields.Char(string="刀柄型号")
+    FJGDate = fields.Datetime(string="预计加工时间")
+    FComment = fields.Char(string="备注")
+    workorder_id = fields.Many2one('mrp.workorder', string="工单")
+
+    # mrs下发编程单创建CNC加工
+    def CNCprocessing_create(self, obj):
+        workorder = self.env['mrp.workorder'].search([('production_id', '=', obj['manufacturing_order_no']),
+                                                      ('processing_panel', '=', obj['processing_panel']),
+                                                      ('routing_type', '=', 'CNC加工')])
+        self.env['sf.cnc.processing'].create({
+            'workorder_id': workorder.id,
+            'FNo': obj['sequence_number'],
+            'FPGName': obj['program_name'],
+            'FKnifeName': obj['cutting_tool_name'],
+            'FDNo': obj['cutting_tool_no'],
+            'FWorkType': obj['processing_type'],
+            'FXY': obj['margin_x_y'],
+            'FZ': obj['margin_z'],
+            'FJGSD': obj['depth_of_processing_z'],
+            'FSCCD': obj['cutting_tool_extension_length'],
+            'FDJSpec': obj['cutting_tool_handle_type'],
+            # 'FJGDate': obj['']
+        })