Accept Merge Request #2293: (feature/7254_new -> develop)

Merge Request: 材料型号增加是否磁吸

Created By: @刘磊
Reviewed By: @胡尧
Approved By: @胡尧 
Accepted By: @刘磊
URL: https://jikimo-hn.coding.net/p/jikimo_sfs/d/jikimo_sf/git/merge/2293

requirements.txt

@@ -4,4 +4,4 @@ wechatpy==1.8.18
 pycryptodome==3.22.0
 openupgradelib==3.10.0
 opcua==0.98.13
-openpyxl
+openpyxl

sf_base/models/basic_parameters_fixture.py

@@ -67,6 +67,52 @@ class BasicParametersFixture(models.Model):
     mounting_hole_depth = fields.Float('安装孔深度(mm)', digits=(16, 2))
     centering_diameter = fields.Float('定心直径(mm)', digits=(16, 2))
 
+        # ‘磁吸托盘’ 字段
+    magnet_tray_length = fields.Float('磁吸托盘长度(mm)', digits=(16, 2))
+    magnet_tray_width = fields.Float('磁吸托盘宽度(mm)', digits=(16, 2))
+    magnet_tray_height = fields.Float('磁吸托盘厚度(mm)', digits=(16, 2))
+    magnet_tray_diameter = fields.Float('磁吸托盘直径(mm)', digits=(16, 2))
+    magnet_tray_weight = fields.Float('磁吸托盘重量(kg)', digits=(16, 2))
+
+    magnet_max_adsorp_length = fields.Float('磁吸托盘最大吸附长度(mm)', digits=(16, 2))
+    magnet_max_adsorp_width = fields.Float('磁吸托盘最大吸附宽度(mm)', digits=(16, 2))
+    magnet_max_adsorp_height = fields.Float('磁吸托盘最大吸附厚度(mm)', digits=(16, 2))
+    magnet_max_adsorp_diameter = fields.Float('磁吸托盘最大吸附直径(mm)', digits=(16, 2))
+    magnet_max_adsorp_force = fields.Float('磁吸托盘最大吸附力(N)', digits=(16, 2))
+
+    magnet_unlocking_method = fields.Selection(
+        [('手动', '手动'), ('气动', '气动'), ('液压', '液压'), ('电动', '电动'), ('其他', '其他')],
+        string='磁吸托盘锁紧方式'
+    )
+    magnet_flatness = fields.Char('磁吸托盘平面精度(mm)', size=20)
+    magnet_max_load = fields.Float('磁吸托盘最大负载(kg)', digits=(16, 2))
+
+    # ‘气吸托盘’ 字段
+    air_tray_length = fields.Float('气吸托盘长度(mm)', digits=(16, 2))
+    air_tray_width = fields.Float('气吸托盘宽度(mm)', digits=(16, 2))
+    air_tray_height = fields.Float('气吸托盘高度(mm)', digits=(16, 2))
+    air_tray_diameter = fields.Float('气吸托盘直径(mm)', digits=(16, 2))
+    air_tray_weight = fields.Float('气吸托盘重量(kg)', digits=(16, 2))
+
+    air_max_adsorp_length = fields.Float('气吸托盘最大吸附长度(mm)', digits=(16, 2))
+    air_max_adsorp_width = fields.Float('气吸托盘最大吸附宽度(mm)', digits=(16, 2))
+    air_max_adsorp_height = fields.Float('气吸托盘最大吸附厚度(mm)', digits=(16, 2))
+    air_max_adsorp_diameter = fields.Float('气吸托盘最大吸附直径(mm)', digits=(16, 2))
+    air_max_adsorp_force = fields.Float('气吸托盘最大吸附力(N)', digits=(16, 2))
+
+    air_unlocking_method = fields.Selection(
+        [('手动', '手动'), ('气动', '气动'), ('液压', '液压'), ('电动', '电动'), ('其他', '其他')],
+        string='气吸托盘锁紧方式'
+    )
+    air_flatness = fields.Char('气吸托盘平面精度(mm)', size=20)
+    air_max_load = fields.Float('气吸托盘最大负载(kg)', digits=(16, 2))
+    air_boolean_chip_blowing_function = fields.Boolean('气吸托盘是否有吹屑功能')
+    air_way_to_install = fields.Selection(
+        [('接口式', '接口式'), ('螺栓固定', '螺栓固定'), ('磁吸式', '磁吸式'), ('其他', '其他')],
+        string='气吸托盘安装方式'
+    )
+
+
     code = fields.Char('编码')
     active = fields.Boolean('有效', default=True)
 
@@ -85,6 +131,10 @@ class BasicParametersFixture(models.Model):
             return self._json_adapter_board_fixture_param(fixture_materials_data)
         elif fixture_materials_name == '三爪卡盘':
             return self._json_scroll_chuck_param(fixture_materials_data)
+        elif fixture_materials_name == '磁吸托盘':
+            return self._json_magnet_tray_param(fixture_materials_data)
+        elif fixture_materials_name == '气吸托盘':
+            return self._json_air_tray_param(fixture_materials_data)
         return {}
 
     def _json_zero_chuck_param(self, obj):
@@ -284,3 +334,57 @@ class BasicParametersFixture(models.Model):
                 'centering_diameter': obj['centering_diameter'],
                 'type_of_drive': obj['type_of_drive'],
                 'active': obj['active']}
+
+    def _json_magnet_tray_param(self, obj):
+        """磁吸托盘：将data数据转换成list数据"""
+        return {
+            'code': obj['code'],
+            'fixture_model_id': self.env['sf.fixture.model'].sudo().search(
+                [('code', '=', obj.get('fixture_model_code'))]).id,
+            'name': obj['name'],
+            'length': obj['length'],
+            'width': obj['width'],
+            'height': obj['height'],
+            'diameter': obj['diameter'],
+            'weight': obj['weight'],
+            'max_adsorp_length': obj['max_adsorp_length'],
+            'max_adsorp_width': obj['max_adsorp_width'],
+            'max_adsorp_height': obj['max_adsorp_height'],
+            'max_adsorp_diameter': obj.get('max_adsorp_diameter'),
+            'max_adsorp_force': obj['max_adsorp_force'],
+            'flatness': obj.get('flatness'),
+            'max_load': obj.get('max_load'),
+            'unlocking_method': obj.get('unlocking_method'),
+            'materials_model_id': self.env['sf.materials.model'].sudo().search(
+                [('materials_no', '=', obj['materials_model_id']), ('active', '=', True)]
+            ).id if obj.get('materials_model_id') else False,
+            'active': obj.get('active', True),
+        }
+
+    def _json_air_tray_param(self, obj):
+        """气吸托盘：将data数据转换成list数据"""
+        return {
+            'code': obj['code'],
+            'fixture_model_id': self.env['sf.fixture.model'].sudo().search(
+                [('code', '=', obj.get('fixture_model_code'))]).id,
+            'name': obj['name'],
+            'length': obj['length'],
+            'width': obj['width'],
+            'height': obj['height'],
+            'diameter': obj['diameter'],
+            'weight': obj['weight'],
+            'max_adsorp_length': obj['max_adsorp_length'],
+            'max_adsorp_width': obj['max_adsorp_width'],
+            'max_adsorp_height': obj['max_adsorp_height'],
+            'max_adsorp_diameter': obj.get('max_adsorp_diameter'),
+            'max_adsorp_force': obj['max_adsorp_force'],
+            'flatness': obj.get('flatness'),
+            'max_load': obj.get('max_load'),
+            'unlocking_method': obj.get('unlocking_method'),
+            'boolean_chip_blowing_function': obj.get('blowing_function', False),
+            'way_to_install': obj.get('way_to_install'),
+            'materials_model_id': self.env['sf.materials.model'].sudo().search(
+                [('materials_no', '=', obj['materials_model_id']), ('active', '=', True)]
+            ).id if obj.get('materials_model_id') else False,
+            'active': obj.get('active', True),
+        }

sf_base/models/common.py

@@ -42,6 +42,7 @@ class MrsMaterialModel(models.Model):
     materials_num = fields.Char("编码号")
     name = fields.Char('型号名')
     need_h = fields.Boolean("热处理", default="false")
+    need_m = fields.Boolean("是否磁吸", default="false")
     mf_materia_post = fields.Char("热处理后密度")
     density = fields.Float("密度(kg/m³)")
     materials_id = fields.Many2one('sf.production.materials', "材料名")

sf_base/models/fixture.py

@@ -35,6 +35,7 @@ class FixtureModel(models.Model):
     glb_url = fields.Char(string="图片")
     status = fields.Boolean('状态')
     active = fields.Boolean('有效', default=False)
+    code = fields.Char(string='编码', readonly=True)
 
     zero_chuck_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
                                      string='零点卡盘基本参数')
@@ -46,11 +47,14 @@ class FixtureModel(models.Model):
                                            string='虎钳夹具基本参数')
     magnet_fixture_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
                                          string='磁吸夹具基本参数')
+    magnet_tray_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
+                                     string='磁吸托盘基本参数')
     adapter_board_fixture_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
                                                 string='转接板(锁板)夹具基本参数')
     scroll_chuck_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
                                        string='三爪卡盘基本参数')
-    code = fields.Char(string='编码', readonly=True)
+    air_tray_ids = fields.One2many('sf.fixture.materials.basic.parameters', 'fixture_model_id',
+                                    string='气吸托盘基本参数')
 
     # def _get_code(self, fixture_model_type_code):
     #     fixture_model = self.env['sf.fixture.model'].sudo().search(

sf_base/views/common_view.xml

@@ -263,6 +263,7 @@
                                 <field name="materials_no" readonly="1" force_save="1"/>
                                 <field name="gain_way" required="0"/>
                                 <field name="density" readonly="1" required="1"  class="custom_required"/>
+                                <field name="need_m" default="false" readonly="1"/>
                             </group>
                             <group>
                                 <field name="rough_machining" required="1"/>
@@ -306,6 +307,7 @@
                     <field name="tensile_strength"/>
                     <field name="hardness" optional="show"/>
                     <field name="need_h"/>
+                    <field name="need_m"/>
                     <field name="apply" widget="many2many_tags" optional="show"/>
                     <field name="density" optional="show"/>
                     <field name="rough_machining" optional="hide"/>
@@ -352,6 +354,7 @@
                                             <field name="materials_no"/>
                                             <field name="name"/>
                                             <field name="need_h"/>
+                                            <field name="need_m"/>
                                             <field name="mf_materia_post"/>
                                             <field name="density"/>
                                             <field name='materials_id' default="default" invisible="1"/>

sf_base/views/fixture_view.xml

@@ -328,6 +328,52 @@
                                     <field name="type_of_drive"/>
                                 </tree>
                             </field>
+                            <field name="air_tray_ids"
+                                attrs="{'invisible': [('fixture_material_type', '!=', '气吸托盘')]}">
+                                <tree editable="bottom" class="center" delete="0">
+                                    <field name="code" invisible="1"/>
+                                    <field name="name"/>
+                                    <field name="length"/>
+                                    <field name="width"/>
+                                    <field name="height"/>
+                                    <field name="diameter"/>
+                                    <field name="weight" string="重量(kg)"/>
+                                    <field name="max_adsorp_length"/>
+                                    <field name="max_adsorp_width"/>
+                                    <field name="max_adsorp_height"/>
+                                    <field name="max_adsorp_diameter"/>
+                                    <field name="max_adsorp_force"/>
+                                    <field name="flatness"/>
+                                    <field name="max_load"/>
+                                    <field name="unlocking_method"/>
+                                    <field name="boolean_chip_blowing_function"/>
+                                    <field name="way_to_install"/>
+                                    <field name="materials_model_id" options="{'no_create': True}" placeholder="请选择"/>
+                                    <field name="active" invisible="1"/>
+                                </tree>
+                            </field>
+                            <field name="magnet_tray_ids"
+                                attrs="{'invisible': [('fixture_material_type', '!=', '磁吸托盘')]}">
+                                <tree editable="bottom" class="center" delete="0">
+                                    <field name="code" invisible="1"/>
+                                    <field name="name"/>
+                                    <field name="length"/>
+                                    <field name="width"/>
+                                    <field name="height"/>
+                                    <field name="diameter"/>
+                                    <field name="weight" string="重量(kg)"/>
+                                    <field name="max_adsorp_length"/>
+                                    <field name="max_adsorp_width"/>
+                                    <field name="max_adsorp_height"/>
+                                    <field name="max_adsorp_diameter"/>
+                                    <field name="max_adsorp_force"/>
+                                    <field name="flatness"/>
+                                    <field name="max_load"/>
+                                    <field name="unlocking_method"/>
+                                    <field name="materials_model_id" options="{'no_create': True}" placeholder="请选择"/>
+                                    <field name="active" invisible="1"/>
+                                </tree>
+                            </field>
                             <field name="scroll_chuck_ids"
                                    attrs="{'invisible': [('fixture_material_type', '!=', '三爪卡盘')]}">
                                 <tree editable="bottom" class="center" delete="0">

sf_dlm_management/views/product_template_management_view.xml

@@ -513,112 +513,168 @@
                         </notebook>
                     </page>
                     <page string="夹具物料参数" attrs="{'invisible': [('categ_type', '!=', '夹具')]}">
-                        <group>
                             <group>
-                                <field name="brand_id" placeholder="请选择" options="{'no_create': True}"/>
-                                <field name="multi_mounting_type_id" placeholder="请选择" options="{'no_create': True}"
-                                       attrs="{'required': [('categ_type', '=', '夹具')]}"/>
-                                <field name="length" string="长度(mm)"/>
-                                <field name="width" string="宽度(mm)"/>
-                                <field name="height" string="高度(mm)"/>
-                                <field name="height_tolerance_value"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
-                                <field name="diameter"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘', '零点托盘', '三爪卡盘'])]}"/>
-                                <field name="weight"/>
-                                <field name="chucking_power_max"
-                                       attrs="{'invisible': [('fixture_material_type', '=','磁吸夹具')]}"/>
-                                <field name="carrying_capacity_max"/>
-                                <field name="rigidity"/>
+                                   <group>
+                                   <field name="brand_id" placeholder="请选择" options="{'no_create': True}"/>
+                                   <field name="multi_mounting_type_id" placeholder="请选择" options="{'no_create': True}"
+                                          attrs="{'required': [('categ_type', '=', '夹具')]}"/>
+                                   <field name="length" string="长度(mm)"/>
+                                   <field name="width" string="宽度(mm)"/>
+                                   <field name="height" string="高度(mm)"/>
+                                   <field name="height_tolerance_value"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
+                                   <field name="diameter"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘', '零点托盘', '三爪卡盘', '磁吸托盘', '气吸托盘'])]}"/>
+                                   <field name="weight"/>
+                                   <field name="chucking_power_max"
+                                          attrs="{'invisible': [('fixture_material_type', '=','磁吸夹具')]}"/>
+                                   <field name="carrying_capacity_max"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
+                                   <field name="rigidity"/>
+                                   </group>
+                                   <group>
+                                   <!-- 夹持工件尺寸 -->
+                                   <label for="gripper_length_min" string="夹持工件最小尺寸"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
+                                   <div class="o_address_format"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}">
+                                          <label for="gripper_length_min" string="长"/>
+                                          <field name="gripper_length_min" class="o_address_zip"/>
+                                          <span>&amp;nbsp;</span>
+                                          <label for="gripper_width_min" string="宽"/>
+                                          <field name="gripper_width_min" class="o_address_zip"/>
+                                          <span>&amp;nbsp;</span>
+                                          <label for="gripper_height_min" string="高"/>
+                                          <field name="gripper_height_min" class="o_address_zip"/>
+                                   </div>
+                                   <label for="gripper_length_max" string="夹持工件最大尺寸"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
+                                   <div class="o_address_format"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}">
+                                          <label for="gripper_length_max" string="长"/>
+                                          <field name="gripper_length_max" class="o_address_zip"/>
+                                          <span>&amp;nbsp;</span>
+                                          <label for="gripper_width_max" string="宽"/>
+                                          <field name="gripper_width_max" class="o_address_zip"/>
+                                          <span>&amp;nbsp;</span>
+                                          <label for="gripper_height_max" string="高"/>
+                                          <field name="gripper_height_max" class="o_address_zip"/>
+                                   </div>
+
+                                   <field name="gripper_diameter_min" string="夹持工件最小直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
+                                   <field name="gripper_diameter_max" string="夹持工件最大直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
+                                   <field name="clamping_diameter" string="装夹直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘'])]}"/>
+                                   <field name="clamping_num" placeholder="请选择" string="装夹单元数"
+                                          attrs="{'invisible': [('fixture_material_type', '!=', '零点卡盘')]}"/>
+                                   <field name="repeated_positioning_accuracy" placeholder="请输入重复定位孔精度"
+                                          string="重复定位精度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘'])]}"/>
+                                   <field name="orientation_dish_diameter" string="定位盘直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
+                                   <field name="boolean_transposing_hole" string="是否有转位孔"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
+                                   <field name="connector_diameter" placeholder="请选择" string="连接头直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘'])]}"/>
+                                   <field name="way_to_install" placeholder="请选择" string="安装方式"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘','气吸托盘'])]}"/>
+                                   <field name="rated_air_pressure" string="额定气压(Mpa)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具'])]}"/>
+
+                                   <field name="transverse_groove" string="横向配合槽n(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['虎钳夹具'])]}"/>
+                                   <field name="longitudinal_fitting_groove" string="纵向配合槽l(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['虎钳夹具'])]}"/>
+
+                                   <field name="rated_adsorption_force" string="额定吸附力(N/cm²)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
+                                   <field name="magnetic_field_height" string="磁场高度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
+                                   <field name="magnetic_pole_plate_grinding_allowance" string="磁极板磨削余量(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
+
+                                   <!-- 磁吸托盘字段 -->
+                                   <field name="magnet_tray_length" string="磁吸托盘长度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_tray_width" string="磁吸托盘宽度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_tray_height" string="磁吸托盘厚度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_tray_diameter" string="磁吸托盘直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_tray_weight" string="磁吸托盘重量(kg)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+
+                                   <field name="magnet_max_adsorp_length" string="磁吸托盘最大吸附长度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_max_adsorp_width" string="磁吸托盘最大吸附宽度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_max_adsorp_height" string="磁吸托盘最大吸附厚度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_max_adsorp_diameter" string="磁吸托盘最大吸附直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_max_adsorp_force" string="磁吸托盘最大吸附力(N)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+
+                                   <field name="magnet_unlocking_method" string="磁吸托盘锁紧方式"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_flatness" string="磁吸托盘平面精度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+                                   <field name="magnet_max_load" string="磁吸托盘最大负载(kg)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸托盘'])]}"/>
+
+                                   <!-- 气吸托盘字段 -->
+                                   <field name="air_tray_length" string="气吸托盘长度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_tray_width" string="气吸托盘宽度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_tray_height" string="气吸托盘高度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_tray_diameter" string="气吸托盘直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_tray_weight" string="气吸托盘重量(kg)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+
+                                   <field name="air_max_adsorp_length" string="气吸托盘最大吸附长度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_max_adsorp_width" string="气吸托盘最大吸附宽度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_max_adsorp_height" string="气吸托盘最大吸附高度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_max_adsorp_diameter" string="气吸托盘最大吸附直径(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_max_adsorp_force" string="气吸托盘最大吸附力(N)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+
+                                   <field name="air_unlocking_method" string="气吸托盘锁紧方式"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_flatness" string="气吸托盘平面精度(mm)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_max_load" string="气吸托盘最大负载(kg)"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_boolean_chip_blowing_function" string="气吸托盘是否有吹屑功能"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+                                   <field name="air_way_to_install" string="气吸托盘安装方式"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气吸托盘'])]}"/>
+
+                                   <field name="boolean_chip_blowing_function" string="是否有吹屑功能"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘','气吸托盘'])]}"/>
+                                   <field name="materials_model_id" placeholder="请选择" options="{'no_create': True}"/>
+                                   <field name="interface_materials_model_id" placeholder="请选择" string="接口类型"
+                                          options="{'no_create': True}"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具'])]}"/>
+                                   <field name="type_of_drive" placeholder="请选择" string="驱动方式"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘','气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
+                                   <field name="unlocking_method" string="解锁方式" placeholder="请选择"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','气吸托盘', '磁吸托盘'])]}"/>
+                                   <field name="machine_tool_type_id" string="适用机床型号" placeholder="请选择"
+                                          options="{'no_create': True}"
+                                          attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
+                                   </group>
                             </group>
-                            <group>
-                                <label for="gripper_length_min" string="夹持工件最小尺寸"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
-                                <div class="o_address_format"
-                                     attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}">
-                                    <label for="gripper_length_min" string="长"/>
-                                    <field name="gripper_length_min" class="o_address_zip"/>
-                                    <span>&amp;nbsp;</span>
-                                    <label for="gripper_width_min" string="宽"/>
-                                    <field name="gripper_width_min" class="o_address_zip"/>
-                                    <span>&amp;nbsp;</span>
-                                    <label for="gripper_height_min" string="高"/>
-                                    <field name="gripper_height_min" class="o_address_zip"/>
-                                </div>
-                                <label for="gripper_length_max" string="夹持工件最大尺寸"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
-                                <div class="o_address_format"
-                                     attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}">
-                                    <label for="gripper_length_max" string="长"/>
-                                    <field name="gripper_length_max" class="o_address_zip"/>
-                                    <span>&amp;nbsp;</span>
-                                    <label for="gripper_width_max" string="宽"/>
-                                    <field name="gripper_width_max" class="o_address_zip"/>
-                                    <span>&amp;nbsp;</span>
-                                    <label for="gripper_width_max" string="高"/>
-                                    <field name="gripper_width_max" class="o_address_zip"/>
-                                </div>
-                                <field name="gripper_diameter_min" string="夹持工件最小直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
-                                <field name="gripper_diameter_max" string="夹持工件最大直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
-                                <field name="clamping_diameter" string="装夹直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘'])]}"/>
-                                <field name="clamping_num" placeholder="请选择" string="装夹单元数"
-                                       attrs="{'invisible': [('fixture_material_type', '!=', '零点卡盘')]}"/>
-                                <field name="repeated_positioning_accuracy" placeholder="请输入重复定位孔精度"
-                                       string="重复定位精度(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘'])]}"/>
-                                <field name="orientation_dish_diameter" string="定位盘直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
-                                <field name="boolean_transposing_hole" string="是否有转位孔"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
-                                <field name="connector_diameter" placeholder="请选择" string="连接头直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘'])]}"/>
-                                <field name="way_to_install" placeholder="请选择" string="安装方式"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘'])]}"/>
-                                <field name="rated_air_pressure" string="额定气压(Mpa)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具'])]}"/>
-
-                                <field name="transverse_groove" string="横向配合槽n(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['虎钳夹具'])]}"/>
-                                <field name="longitudinal_fitting_groove" string="纵向配合槽l(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['虎钳夹具'])]}"/>
-
-                                <field name="rated_adsorption_force" string="额定吸附力(N/cm²)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
-                                <field name="magnetic_field_height" string="磁场高度(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
-                                <field name="magnetic_pole_plate_grinding_allowance" string="磁极板磨削余量(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['磁吸夹具'])]}"/>
-
-                                <field name="screw_size" string="螺牙大小(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['转接板(锁板)夹具'])]}"/>
-                                <field name="via_hole_diameter" string="过孔直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['转接板(锁板)夹具'])]}"/>
-
-                                <field name="mounting_hole_depth" string="安装孔深度(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['三爪卡盘'])]}"/>
-                                <field name="centering_diameter" string="定心直径(mm)"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['三爪卡盘'])]}"/>
-
-                                <field name="boolean_chip_blowing_function" string="是否有吹屑功能"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘','零点托盘'])]}"/>
-                                <field name="materials_model_id" placeholder="请选择" options="{'no_create': True}"/>
-                                <field name="interface_materials_model_id" placeholder="请选择" string="接口类型"
-                                       options="{'no_create': True}"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['气动夹具','虎钳夹具','磁吸夹具'])]}"/>
-                                <field name="type_of_drive" placeholder="请选择" string="驱动方式"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点托盘','气动夹具','虎钳夹具','磁吸夹具','转接板(锁板)夹具','三爪卡盘'])]}"/>
-                                <field name="unlocking_method" string="解锁方式" placeholder="请选择"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
-                                <field name="machine_tool_type_id" string="适用机床型号" placeholder="请选择"
-                                       options="{'no_create': True}"
-                                       attrs="{'invisible': [('fixture_material_type', 'not in', ['零点卡盘'])]}"/>
-
-                            </group>
-                        </group>
-                    </page>
+                     </page>
                 </xpath>
             </field>
         </record>

sf_manufacturing/models/product_template.py

@@ -1215,6 +1215,51 @@ class ResProductFixture(models.Model):
     mounting_hole_depth = fields.Float('安装孔深度(mm)', digits=(16, 2))
     centering_diameter = fields.Float('定心直径(mm)', digits=(16, 2))
 
+    # ‘磁吸托盘’ 字段
+    magnet_tray_length = fields.Float('磁吸托盘长度(mm)', digits=(16, 2))
+    magnet_tray_width = fields.Float('磁吸托盘宽度(mm)', digits=(16, 2))
+    magnet_tray_height = fields.Float('磁吸托盘厚度(mm)', digits=(16, 2))
+    magnet_tray_diameter = fields.Float('磁吸托盘直径(mm)', digits=(16, 2))
+    magnet_tray_weight = fields.Float('磁吸托盘重量(kg)', digits=(16, 2))
+
+    magnet_max_adsorp_length = fields.Float('磁吸托盘最大吸附长度(mm)', digits=(16, 2))
+    magnet_max_adsorp_width = fields.Float('磁吸托盘最大吸附宽度(mm)', digits=(16, 2))
+    magnet_max_adsorp_height = fields.Float('磁吸托盘最大吸附厚度(mm)', digits=(16, 2))
+    magnet_max_adsorp_diameter = fields.Float('磁吸托盘最大吸附直径(mm)', digits=(16, 2))
+    magnet_max_adsorp_force = fields.Float('磁吸托盘最大吸附力(N)', digits=(16, 2))
+
+    magnet_unlocking_method = fields.Selection(
+        [('手动', '手动'), ('气动', '气动'), ('液压', '液压'), ('电动', '电动'), ('其他', '其他')],
+        string='磁吸托盘锁紧方式'
+    )
+    magnet_flatness = fields.Char('磁吸托盘平面精度(mm)', size=20)
+    magnet_max_load = fields.Float('磁吸托盘最大负载(kg)', digits=(16, 2))
+
+    # ‘气吸托盘’ 字段
+    air_tray_length = fields.Float('气吸托盘长度(mm)', digits=(16, 2))
+    air_tray_width = fields.Float('气吸托盘宽度(mm)', digits=(16, 2))
+    air_tray_height = fields.Float('气吸托盘高度(mm)', digits=(16, 2))
+    air_tray_diameter = fields.Float('气吸托盘直径(mm)', digits=(16, 2))
+    air_tray_weight = fields.Float('气吸托盘重量(kg)', digits=(16, 2))
+
+    air_max_adsorp_length = fields.Float('气吸托盘最大吸附长度(mm)', digits=(16, 2))
+    air_max_adsorp_width = fields.Float('气吸托盘最大吸附宽度(mm)', digits=(16, 2))
+    air_max_adsorp_height = fields.Float('气吸托盘最大吸附厚度(mm)', digits=(16, 2))
+    air_max_adsorp_diameter = fields.Float('气吸托盘最大吸附直径(mm)', digits=(16, 2))
+    air_max_adsorp_force = fields.Float('气吸托盘最大吸附力(N)', digits=(16, 2))
+
+    air_unlocking_method = fields.Selection(
+        [('手动', '手动'), ('气动', '气动'), ('液压', '液压'), ('电动', '电动'), ('其他', '其他')],
+        string='气吸托盘锁紧方式'
+    )
+    air_flatness = fields.Char('气吸托盘平面精度(mm)', size=20)
+    air_max_load = fields.Float('气吸托盘最大负载(kg)', digits=(16, 2))
+    air_boolean_chip_blowing_function = fields.Boolean('气吸托盘是否有吹屑功能')
+    air_way_to_install = fields.Selection(
+        [('接口式', '接口式'), ('螺栓固定', '螺栓固定'), ('磁吸式', '磁吸式'), ('其他', '其他')],
+        string='气吸托盘安装方式'
+    )
+
     @api.onchange('specification_fixture_id')
     def _onchange_specification_fixture_id(self):
         if self.specification_fixture_id:

sf_mrs_connect/models/sync_common.py

@@ -9,6 +9,7 @@ from odoo import models
 from odoo.exceptions import ValidationError
 from odoo.addons.sf_base.commons.common import Common
 
+
 _logger = logging.getLogger(__name__)
 
 
@@ -178,6 +179,7 @@ class sfMaterialModel(models.Model):
                         materials_model.mf_materia_post = item['mf_materia_post']
                         materials_model.materials_id = materials.id
                         materials_model.need_h = item['need_h']
+                        materials_model.need_m = item['need_m']
                         materials_model.density = item['density']
                         materials_model.active = item['active']
                     else:
@@ -192,6 +194,7 @@ class sfMaterialModel(models.Model):
                             "active": item['active'],
                             "materials_id": materials.id,
                             "need_h": item['need_h'],
+                            "need_m": item['need_m'],
                             "mf_materia_post": item['mf_materia_post'],
                             "density": item['density'],
                         })
@@ -228,6 +231,7 @@ class sfMaterialModel(models.Model):
                             "standards_id": self.env['sf.international.standards'].search(
                                 [("name", '=', item['standards_id'])]).id,
                             "need_h": item['need_h'],
+                            "need_m": item['need_m'],
                             "alloy_code": item['alloy_code'],
                             "mf_materia_post": item['mf_materia_post'],
                             "density": item['density'],
@@ -248,6 +252,7 @@ class sfMaterialModel(models.Model):
                         materials_model.mf_materia_post = item['mf_materia_post']
                         materials_model.materials_id = materials.id
                         materials_model.need_h = item['need_h']
+                        materials_model.need_m = item['need_m']
                         materials_model.density = item['density']
                         materials_model.active = item['active']
                         materials_model.materials_code= item['materials_code']
@@ -1610,6 +1615,10 @@ class SyncfixtureMaterialsBasicParameters(models.Model):
                     self._write_or_create(all_list.get('adapter_board_yesterday_list'), '转接板(锁板)夹具')
                 if all_list.get('scroll_chuck_all_list'):
                     self._write_or_create(all_list.get('scroll_chuck_yesterday_list'), '三爪卡盘')
+                if all_list.get('air_blow_tray_all_list'):
+                    self._write_or_create(all_list.get('air_tray_yesterday_list'), '气吸托盘')
+                if all_list.get('magnet_tray_all_list'):
+                    self._write_or_create(all_list.get('magnet_tray_yesterday_list'), '磁吸托盘')
         else:
             raise ValidationError("夹具型号基本参数认证未通过")
 
@@ -1638,6 +1647,10 @@ class SyncfixtureMaterialsBasicParameters(models.Model):
                     self._write_or_create(all_list.get('adapter_board_all_list'), '转接板(锁板)夹具')
                 if all_list.get('scroll_chuck_all_list'):
                     self._write_or_create(all_list.get('scroll_chuck_all_list'), '三爪卡盘')
+                if all_list.get('air_blow_tray_all_list'):
+                    self._write_or_create(all_list.get('air_tray_all_list'), '气吸托盘')
+                if all_list.get('magnet_tray_all_list'):
+                    self._write_or_create(all_list.get('magnet_tray_all_list'), '磁吸托盘')
         else:
             raise ValidationError("夹具型号基本参数认证未通过")
 
@@ -3230,4 +3243,4 @@ class EmbryoRedundancySync(models.Model):
                         "height": item['height'],
                         "active": item['active'],
                         "remark": item['remark'],
-                    })
+                    })

sf_plan_management/i18n/zh_CN.po

@@ -45759,6 +45759,11 @@ msgstr ""
 msgid "热处理"
 msgstr ""
 
+#. module: sf_base
+#: model:ir.model.fields,field_description:sf_base.field_sf_materials_model__need_m
+msgid "是否磁吸"
+msgstr ""
+
 #. module: sf_base
 #: model:ir.model.fields,field_description:sf_base.field_sf_materials_model__mf_materia_post
 msgid "热处理后密度"

sf_purchase_arrival_inform/__init__.py

@@ -1,2 +0,0 @@
-from . import models
-from . import wizard

sf_purchase_arrival_inform/__manifest__.py

@@ -1,33 +0,0 @@
-# -*- coding: utf-8 -*-
-# Part of Odoo. See LICENSE file for full copyright and licensing details.
-{
-    'name': '机企猫智能工厂 采购到货通知',
-    'version': '1.1',
-    'summary': '智能工厂计划管理',
-    'sequence': 1,
-    'description': """
-在本模块，支持采购到货通知
-    """,
-    'category': 'sf',
-    'website': 'https://www.sf.jikimo.com',
-    'depends': ['jikimo_purchase_request', 'quality_control', 'sf_manufacturing'], 
-    'data': [
-        'views/product_category.xml',
-        'views/purchase_view.xml',
-        'wizard/purchase_confirm_wizard_view.xml',
-        'security/ir.model.access.csv',
-    ],
-    'demo': [   
-    ],
-    'assets': {
-        'web.assets_qweb': [
-        ],
-        'web.assets_backend': [
-            
-        ]
-    },
-    'license': 'LGPL-3',
-    'installable': True,
-    'application': False,
-    'auto_install': False,
-}

sf_purchase_arrival_inform/models/__init__.py

@@ -1,5 +0,0 @@
-from . import product_category
-from . import purchase_order
-from . import storage_list
-from . import quality_check
-

sf_purchase_arrival_inform/models/product_category.py

@@ -1,7 +0,0 @@
-from odoo import models, fields
-
-
-class SfProductCategory(models.Model):
-    _inherit = 'product.category'
-    arrival_inform = fields.Boolean('到货通知', default=False)
-    

sf_purchase_arrival_inform/models/purchase_order.py

@@ -1,108 +0,0 @@
-from odoo import models, fields, api, _
-from odoo.exceptions import UserError
-
-
-class SfPurchaseOrder(models.Model):
-    _inherit = 'purchase.order'
-    
-    # 收料入库明细
-    storage_list_ids = fields.One2many('storage.list', 'purchase_order_id', string='收料入库明细')
-    
-    # 计算字段：总收料数量
-    total_received_quantity = fields.Float(string='到货数量',compute='_compute_total_received_quantity',store=True)
-    
-    purchase_order_line_id = fields.Many2one('purchase.order.line', string='采购订单行')
-    
-    @api.depends('order_line.arrival_quantity','order_line.product_qty')
-    def _compute_total_received_quantity(self):
-        for order in self:
-            total_arrival_quantity = sum(line.arrival_quantity for line in order.order_line)
-            total_product_qty=sum(line.product_qty for line in order.order_line)
-            order.total_received_quantity = f'{total_arrival_quantity}/{total_product_qty}'
-    
-    def open_arrival_inform(self):
-        self.ensure_one()
-        # 方式一：把数据写入普通模型（如果要持久化关联关系等场景）
-        # 先清空旧数据（如果需要），避免重复
-        self.env["storage.list"].search([
-            ("purchase_order_id", "=", self.id)
-        ]).unlink()
-        pickings = self.env['stock.picking'].search([
-            ('origin', '=', self.name),
-            # ('picking_type_code', '=', 'incoming'),
-            ('state', '!=', 'cancel')
-        ])
-        relate_vals_list = []
-        for picking in pickings:
-            for move_line in picking.move_ids_without_package:
-                relate_vals = {
-                    "purchase_order_id": self.id,
-                    "product_id": move_line.product_id.id,
-                    "picking_id": picking.id,
-                    "ordered_quantity": move_line.product_uom_qty,
-                    # "current_arrival_quantity": move_line.product_uom_qty,  # 默认到货数量等于需求数量
-                    "product_code": move_line.product_id.default_code,
-                    "product_remark": move_line.name,
-                    "part_number": move_line.part_number,
-                    "state": picking.state,
-                }
-                relate_vals_list.append(relate_vals)
-        if relate_vals_list:
-            self.env["storage.list"].create(relate_vals_list)
-        action = {
-            'name': _("选择到货通知"),
-            'type':'ir.actions.act_window',
-            'view_mode':'form',
-            'views': [(self.env.ref('sf_purchase_arrival_inform.storage_list_wrapper_form').id, 'form')],
-            'res_model':'purchase.order',
-            'target':'new',
-            'res_id': self.id,
-            'context': {
-                'dialog_size': 'large',
-            },
-        }
-        return action
-    
-    def confirm_arrival_inform(self):
-        """确认到货通知"""
-        # 直接调用storage_list的批量确认方法
-        if self.storage_list_ids:
-            self.storage_list_ids.button_confirm()
-        
-        # 关闭弹窗
-        return {'type': 'ir.actions.act_window_close'}
-    
-    #询价单确认时加二次确认逻辑
-    def button_confirm(self):
-        """采购订单确认，弹出确认向导"""
-        # 无订单行时直接确认
-        if not self.order_line:
-            return super().button_confirm()
-        
-        # 直接创建向导记录并打开
-        wizard = self.env['purchase.confirm.wizard'].create({
-            'purchase_order_id': self.id
-        })
-        
-        return {
-            'name': _('询价单订单确认'),
-            'type': 'ir.actions.act_window',
-            'res_model': 'purchase.confirm.wizard',
-            'res_id': wizard.id,
-            'view_mode': 'form',
-            'target': 'new',
-        }
-    
-    def _execute_original_confirm(self):
-        """执行原始的确认逻辑"""
-        res = super().button_confirm()
-        return res
-
-class SfPurchaseOrderLine(models.Model):
-    _inherit = 'purchase.order.line'
-     
-    # 到货数量（实际存储字段）
-    arrival_quantity = fields.Float(string='到货数量', default=0.0, help='累计到货数量')
-    
-
-   

sf_purchase_arrival_inform/models/quality_check.py

@@ -1,61 +0,0 @@
-from odoo import models, fields, api
-import logging
-
-_logger = logging.getLogger(__name__)
-  
-class QualityPoint(models.Model):
-    _inherit = 'quality.point'
-    
-    quality_status = fields.Selection([
-        ('waiting', '等待'),
-        ('none', '待处理')
-    ], string='默认质检状态', 
-       help='收料入库时质量检查单的默认状态。如果设置了此值，系统会在创建质检单时自动使用该状态。')
-    
-class QualityCheck(models.Model):
-    _inherit = 'quality.check'
-
-    @api.model_create_multi
-    def create(self, vals_list):
-        """
-        重写create方法，根据quality.point配置动态设置quality_state
-        当picking_type为收料入库时，从质量控制点配置中获取默认状态
-        """
-        # 先调用父类方法创建记录
-        records = super().create(vals_list)
-        
-        # 对创建的记录进行状态调整
-        for record in records:
-            try:
-                # 只处理收料入库的质检单且未手动设置状态的记录
-                if (record.picking_id and 
-                    record.picking_id.picking_type_id.code == 'incoming' and
-                    record.quality_state in ['none', 'waiting']):  # 只调整默认状态
-                    
-                    # 查找匹配的质量控制点配置
-                    quality_point = record.point_id
-                    if not quality_point and record.product_id:
-                        # 如果没有直接关联的质量点，则根据产品和作业类型查找
-                        domain = self.env['quality.point']._get_domain(
-                            record.product_id, 
-                            record.picking_id.picking_type_id,
-                            measure_on='product'
-                        )
-                        quality_point = self.env['quality.point'].search(domain, limit=1)
-                    
-                    # 如果找到配置且有默认状态值，则更新记录状态
-                    if quality_point and quality_point.quality_status:
-                        original_state = record.quality_state
-                        record.quality_state = quality_point.quality_status
-                        
-                        _logger.info(
-                            f"质量检查单状态已更新: {record.name}, "
-                            f"产品: {record.product_id.name}, "
-                            f"收料单: {record.picking_id.name}, "
-                            f"状态: {original_state} -> {quality_point.quality_status}"
-                        )
-                        
-            except Exception as e:
-                _logger.warning(f"更新质量检查单状态时发生错误: {record.name}, 错误: {str(e)}")
-        
-        return records

sf_purchase_arrival_inform/models/storage_list.py

@@ -1,140 +0,0 @@
-from odoo import models, fields, api
-from odoo.exceptions import ValidationError
-
-
-class StorageList(models.Model):
-    _name = 'storage.list'
-    _description = '收料入库明细'
-    _order = 'create_date desc'
-    
-    # 基础关联字段
-    purchase_order_id = fields.Many2one('purchase.order', string='采购订单', required=True)
-    picking_id = fields.Many2one('stock.picking', string='收料入库单', readonly=True)
-    product_id = fields.Many2one('product.product', string='产品', required=True)
-    
-    # 产品信息（基于product_id的related字段）
-    product_code = fields.Char(related='product_id.default_code', string='产品料号', store=True)
-    product_remark = fields.Text(string='产品说明')
-    part_number = fields.Char(string='零件图号')
-    
-    # 数量字段
-    ordered_quantity = fields.Float(string='需求数量', required=True)
-    # 到货数量，默认=需求数量
-    current_arrival_quantity = fields.Float(string='到货数量', required=True)
-    
-    
-    @api.model
-    def create(self, vals):
-        # 如果没有设置current_arrival_quantity，则默认等于ordered_quantity
-        if 'current_arrival_quantity' not in vals and 'ordered_quantity' in vals:
-            vals['current_arrival_quantity'] = vals['ordered_quantity']
-        return super().create(vals)
-    
-    @api.constrains('current_arrival_quantity')
-    def _check_current_arrival_quantity(self):
-        for line in self:
-            if line.current_arrival_quantity <= 0:
-                raise ValidationError('到货数量必须大于0')
-            if line.current_arrival_quantity > line.ordered_quantity:
-                raise ValidationError('当前到货数量不能超过需求数量') 
-        
-    def button_confirm(self):
-        """更新采购订单行的收料数量"""
-        for record in self:
-            # 查找对应的采购订单行
-            order_line = self.env['purchase.order.line'].search([
-                ('order_id', '=', record.purchase_order_id.id),
-                ('product_id', '=', record.product_id.id)
-            ], limit=1)
-            
-            if order_line:
-                # 累加当前记录的到货数量到采购订单行
-                order_line.arrival_quantity += record.current_arrival_quantity
-        
-        # 更新质量检查单状态为待处理
-        if self:
-            self._update_quality_check_status(self[0].purchase_order_id)
-    
-
-    def _update_quality_check_status(self, purchase_order):
-        """更新质量检查单状态为待处理   
-        Args:
-            purchase_order: 采购订单记录    
-        Returns:
-            int: 更新的质量检查单数量
-        """
-        try:
-            # 获取当前到货通知涉及的收料入库单
-            storage_records = self.env['storage.list'].search([
-                ('purchase_order_id', '=', purchase_order.id)
-            ])            
-            if not storage_records:
-                return 0
-            
-            # 收集所有相关的picking_id和product_id（过滤空值）
-            picking_ids = [pid for pid in storage_records.mapped('picking_id.id') if pid]
-            product_ids = [pid for pid in storage_records.mapped('product_id.id') if pid]
-            
-            if not picking_ids or not product_ids:
-                return 0
-            
-            # 构建质量检查单搜索域，包含等待和待处理状态
-            base_domain = [
-                ('quality_state', 'in', ['waiting', 'none']),
-                ('product_id', 'in', product_ids),
-            ]
-            
-            # 方法1：通过picking_id精确匹配质量检查单
-            quality_checks_by_picking = self.env['quality.check'].search(
-                base_domain + [('picking_id', 'in', picking_ids)]
-            )
-            
-            # 方法2：通过move_id匹配（更精确，因为一个picking可能有多个move）
-            stock_moves = self.env['stock.move'].search([
-                ('picking_id', 'in', picking_ids),
-                ('product_id', 'in', product_ids),
-            ])
-            
-            quality_checks_by_move = self.env['quality.check']
-            if stock_moves:
-                quality_checks_by_move = self.env['quality.check'].search(
-                    base_domain + [('move_id', 'in', stock_moves.ids)]
-                )
-            
-            # 方法3：通过move_line_id匹配（最精确）
-            move_lines = self.env['stock.move.line'].search([
-                ('picking_id', 'in', picking_ids),
-                ('product_id', 'in', product_ids),
-            ])
-            
-            quality_checks_by_move_line = self.env['quality.check']
-            if move_lines:
-                quality_checks_by_move_line = self.env['quality.check'].search(
-                    base_domain + [('move_line_id', 'in', move_lines.ids)]
-                )
-            
-            # 合并所有匹配的质量检查单（去重）
-            all_quality_checks = quality_checks_by_picking | quality_checks_by_move | quality_checks_by_move_line
-            
-            if not all_quality_checks:
-                return 0
-            
-            # 批量更新状态为待处理
-            all_quality_checks.write({'quality_state': 'none'})
-            
-            # 记录日志
-            product_names = storage_records.mapped('product_id.name')
-            purchase_order.message_post(
-                body=f"到货通知确认：已更新 {len(all_quality_checks)} 个质量检查单状态为待处理<br/>"
-                     f"涉及产品：{', '.join(product_names)}<br/>"
-                     f"涉及收料入库单：{', '.join([p.name or '' for p in storage_records.mapped('picking_id')])}"
-            )
-            
-            return len(all_quality_checks)
-            
-        except Exception as e:
-            # 记录错误日志，但不阻断流程
-            purchase_order.message_post(
-                body=f"更新质量检查单状态时发生错误：{str(e)}"
-            )
-            return 0

sf_purchase_arrival_inform/security/ir.model.access.csv

@@ -1,4 +0,0 @@
-id,name,model_id:id,group_id:id,perm_read,perm_write,perm_create,perm_unlink
-access_storage_list,storage.list,model_storage_list,purchase.group_purchase_user,1,1,1,1
-access_purchase_confirm_wizard,purchase.confirm.wizard,model_purchase_confirm_wizard,purchase.group_purchase_user,1,1,1,1
-access_purchase_confirm_wizard_line,purchase.confirm.wizard.line,model_purchase_confirm_wizard_line,purchase.group_purchase_user,1,1,1,1

sf_purchase_arrival_inform/views/product_category.xml

@@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<odoo>
-    <data>
-        <!-- 继承产品分类视图 -->
-        <record id="product_category_form_view_inherit" model="ir.ui.view">
-            <field name="name">product.category.form.inherit</field>
-            <field name="model">product.category</field>
-            <field name="inherit_id" ref="stock.product_category_form_view_inherit" />
-            <field name="arch" type="xml">
-                <xpath expr="//field[@name='removal_strategy_id']" position="after">
-                    <field name="arrival_inform"/>
-                </xpath>
-            </field>
-        </record>
-        <record id="quality_view_form" model="ir.ui.view">
-            <field name="name">arrival.inform.quality.point.view.form</field>
-            <field name="model">quality.point</field>
-            <field name="inherit_id" ref="mrp_workorder.quality_point_view_form_inherit_mrp"/>
-            <field name="mode">primary</field>
-            <field name="arch" type="xml">
-                <field name="picking_type_ids" position="after">
-                    <field name="quality_status"/>
-                </field>
-            </field>
-        </record>
-    </data>
-</odoo>

sf_purchase_arrival_inform/views/purchase_view.xml

@@ -1,58 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<odoo>
-    <data>
-        <!-- 继承采购订单视图 -->
-        <record id="purchase_order_view_tree_inherit" model="ir.ui.view">
-            <field name="name">purchase.order.tree.inherit</field>
-            <field name="model">purchase.order</field>
-            <field name="inherit_id" ref="purchase.purchase_order_view_tree"/>
-            <field name="arch" type="xml">
-                <xpath expr="//field[@name='date_planned']" position="after">
-                    <field name="total_received_quantity"/>
-                </xpath>
-                <xpath expr="//tree" position="inside">
-                    <button name="open_arrival_inform" string="到货通知" type="object" class="btn-primary"/>
-                </xpath>
-            </field>
-        </record>
-        <record id="purchase_order_form" model="ir.ui.view">
-            <field name="name">purchase.order.form</field>
-            <field name="model">purchase.order</field>
-            <field name="inherit_id" ref="purchase.purchase_order_form" />
-            <field name="arch" type="xml">
-                <xpath expr="//field[@name='order_line']/tree" position="inside">
-                    <field name="arrival_quantity"/>
-                </xpath>
-            </field>
-        </record>
-
-        <!-- 到货通知form视图 -->
-        <record id="storage_list_wrapper_form" model="ir.ui.view">
-            <field name="name">storage.list.wrapper.form</field>
-            <field name="model">purchase.order</field>
-            <field name="arch" type="xml">
-                <form string="选择到货通知" create="false" duplicate="false">
-                    <group>
-                        <field name="name" readonly="1"/>
-                    </group>
-                    
-                    <field name="storage_list_ids">
-                        <tree string="收料入库明细" editable="bottom" create="false" delete="true" export="false">
-                            <field name="product_code"/>
-                            <field name="product_id" readonly="1"/>
-                            <field name="product_remark" widget="section_and_note_text" readonly="1"/>
-                            <field name="part_number" readonly="1"/>
-                            <field name="ordered_quantity" readonly="1"/>
-                            <field name="current_arrival_quantity" attrs="{'invisible': [('ordered_quantity', '=', '0')]}"/>
-                        </tree>
-                    </field>
-                    
-                    <footer>
-                        <button name="confirm_arrival_inform" string="确认" type="object" class="btn-primary" data-hotkey="q"/>
-                        <button string="取消" class="btn-secondary" special="cancel" data-hotkey="z"/>
-                    </footer>
-                </form>
-            </field>
-        </record>
-    </data>
-</odoo>

sf_purchase_arrival_inform/wizard/__init__.py

@@ -1,2 +0,0 @@
-from . import purchase_confirm_wizard
-

sf_purchase_arrival_inform/wizard/purchase_confirm_wizard.py

@@ -1,64 +0,0 @@
-from odoo import models, fields, api, _
-
-
-class PurchaseConfirmWizard(models.TransientModel):
-    _name = 'purchase.confirm.wizard'
-    _description = '采购订单确认向导'
-
-    purchase_order_id = fields.Many2one('purchase.order', string='采购订单', required=True)
-    line_ids = fields.One2many('purchase.confirm.wizard.line', 'wizard_id', string='产品明细')
-    
-    @api.model_create_multi
-    def create(self, vals_list):
-        """创建向导时自动生成产品明细"""
-        records = super().create(vals_list)
-        
-        for record in records:
-            if record.purchase_order_id:
-                # 自动创建产品明细行
-                line_data = []
-                for line in record.purchase_order_id.order_line:
-                    line_data.append({
-                        'wizard_id': record.id,
-                        'product_id': line.product_id.id,
-                        'product_name': line.product_id.name,
-                        'product_qty': line.product_qty,
-                        'product_uom': line.product_uom.name,
-                        'uom_rounding': line.product_uom.rounding,
-                    })
-                
-                if line_data:
-                    self.env['purchase.confirm.wizard.line'].create(line_data)
-        
-        return records
-    
-    def action_confirm(self):
-        """确认采购订单"""
-        if self.purchase_order_id:
-            # 调用原始的确认方法
-            self.purchase_order_id._execute_original_confirm()
-            
-            # 返回关闭向导并刷新采购订单页面
-            return {
-                'type': 'ir.actions.act_window_close',
-                'infos': {
-                    'title': _('成功'),
-                    'message': _('采购订单已确认成功！'),
-                }
-            }
-        
-    def action_cancel(self):
-        """取消操作"""
-        return {'type': 'ir.actions.act_window_close'}
-
-
-class PurchaseConfirmWizardLine(models.TransientModel):
-    _name = 'purchase.confirm.wizard.line'
-    _description = '采购订单确认向导明细'
-
-    wizard_id = fields.Many2one('purchase.confirm.wizard', string='向导', ondelete='cascade')
-    product_id = fields.Many2one('product.product', string='产品')
-    product_name = fields.Char(string='产品名称')
-    product_qty = fields.Float(string='数量')
-    product_uom = fields.Char(string='单位')
-    uom_rounding = fields.Float(string='舍入精度') 

sf_purchase_arrival_inform/wizard/purchase_confirm_wizard_view.xml

@@ -1,35 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<odoo>
-    <!-- 采购订单确认向导视图 -->
-    <record id="purchase_confirm_wizard_form" model="ir.ui.view">
-        <field name="name">purchase.confirm.wizard.form</field>
-        <field name="model">purchase.confirm.wizard</field>
-        <field name="arch" type="xml">
-            <form string="采购订单确认">
-                <div class="alert alert-warning" role="alert">
-                    <strong>确认提示：</strong>以下产品数量将按单位舍入精度向上取整处理，请核实后确认是否继续。
-                </div>
-
-                <group>
-                    <field name="purchase_order_id" readonly="1"/>
-                </group>
-
-                <separator string="产品明细信息"/>
-
-                <field name="line_ids" readonly="1" nolabel="1" widget="one2many_list">
-                    <tree decoration-info="True" create="false" edit="false">
-                        <field name="product_name" string="产品名称" width="40%"/>
-                        <field name="product_qty" string="订购数量" width="20%"/>
-                        <field name="product_uom" string="计量单位" width="20%"/>
-                        <field name="uom_rounding" string="舍入精度" widget="float" digits="[16,6]" width="20%"/>
-                    </tree>
-                </field>
-
-                <footer>
-                    <button name="action_confirm" string="确认订单" type="object" class="btn-primary"/>
-                    <button name="action_cancel" string="取消" type="object" class="btn-secondary"/>
-                </footer>
-            </form>
-        </field>
-    </record>
-</odoo>